Vortex Tube Air Cooling: The Effect on Surface Roughness and Power Consumption in Dry Turning
نویسندگان
چکیده
منابع مشابه
Effect of surface roughness on steel-steel dry friction coefficient
The influence of surface roughness magnitude and direction on dry static friction coefficient between two similar steel samples has been studied through an experiment. A testing apparatus has been designed and fabricated to measure the friction coefficient for a few forms of surface asperity. According to the results of the experiments, dry friction coefficient is affected by both magnitude and...
متن کاملEffect of Surface Roughness on Vortex Length and Efficiency of Gas-oil Cyclones through CFD Modelling
Separation of suspended droplets in a fluid flow has been a great concern for scientists and technologists. In the current study, the effect of the surface roughness on flow field and the performance of a gas-oil cyclone is studied numerically. The droplets and the turbulent airflow inside the cyclone are considered to be the discrete and continuous phases respectively. The Reynolds stress mode...
متن کاملSurface roughness and dry friction.
Persson's multiscale contact mechanics theory combined with a multiscale Brillouin-Prandtl-Tomlinson model is used to show that on the basis of these models "dry friction" [i.e., kinetic friction that remains at exceedingly small velocities (but still above the creep range) close to its value at higher velocities] should almost always occur for self-affine surfaces when the dominant interaction...
متن کاملEffect of Cutting Parameters on Tool Wear, Surface Roughness and Material Removal Rate During Dry Turning of EN-31 Steel
ISBN 978-93-82338-21-5 | © 2012 Bonfring Abstract--The present paper is an experimental study to investigate the effect of cutting parameters (cutting speed, depth of cut and feed) on tool wear, surface roughness and material removal rate (MRR) during dry turning of EN-31 steel. Turning experiments were conducted with cutting speeds: 250, 300, 350 m/min, feeds: 0.15, 0.2, 0.25 mm/rev and depth ...
متن کاملthe effect of oxytetracycline on serum calcium, phosphorus and magnesium in cattle
نتایج این مطالعه نشان می دهد که مقدار کلسیم (یونیزه و تام)، منیزیم و فسفر به طور معنی داری تغییر پیدا کرد به جزء مقدار کلسیم تام و منیزیم در روش داخل عضلانی که تغییر معنی داری نداشته است. بر اساس نتایج این مطالعه می توان نتیجه گیری کرد که اکسی تتراساکلین بر روی مقادیر سرمی کلسیم و منیزیم تأثیر می گذارد باید مقدار این کاتیون ها در بیماران، در هنگامی که اکسی تتراسایکلین استفاده می شود مورد توجه ق...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Automotive and Mechanical Engineering
سال: 2013
ISSN: 2229-8649,2180-1606
DOI: 10.15282/ijame.8.2013.34.0122