Void-by-void versus multiple void interaction under mode I-mode II or mode I-mode III loading conditions
نویسندگان
چکیده
منابع مشابه
The Effect of Inclined U-Notch Geometry on Mode Ratio (KII/KI) under Mixed Mode (I + II) Loading
In inclined U-notches, the mixed mode (I + II) loading occurs and the mode ratio can be increased by varying the notch angle. In this paper, the effect of the inclined U-notch geometry, i.e. the notch depth, the notch angle, the notch root radius, and the position of the notch with respect to supports, on the mode ratio (KII/KI) have been studied. Three-point bending and plane strain condition ...
متن کاملTwo mechanisms of ductile fracture: void by void growth versus multiple void interaction
Two distinct mechanisms of crack initiation and advance by void growth have been identified in the literature on the mechanics of ductile fracture. One is the interaction a single void with the crack tip characterizing initiation and the subsequent void by void advance of the tip. This mechanism is represented by the early model of Rice and Johnson and the subsequent more detailed numerical com...
متن کاملFinite Element Modeling of Crack Initiation Angle Under Mixed Mode (I/II) Fracture
Present study deals with the prediction of crack initiation angle for mixed mode (I/II) fracture using finite element techniques and J-Integral based approach. The FE code ANSYS is used to estimate the stress intensity factor numerically. The estimated values of SIF were incorporated into six different crack initiation angle criteria to predict the crack initiation angle. Single edge crack spec...
متن کاملExperimental investigation of mode I fracture energy of adhesively bonded joints under impact loading conditions
Background Recently, the automotive industry has paid attention to multi-material structures to reduce CO2 emission. Hence, the use of light-weight and high-strength materials such as Al–Mg alloys, high-tensile-strength steel and carbon-fiber-reinforced plastics (CFRP) is essential to lighten the vehicle weight [1]. Joining methods for these dissimilar materials are the key to apply them into t...
متن کاملDynamic fracture initiation in brittle materials under combined mode I/II loading
A new test method has been developed to measure the resistance of dynamic fracture initiation in brittle materials under combined mode I/I loadings. The Brazilian disks with center-cracks have been fractured under oblique impact loadings in diarnetral-compression. The dynamic stress intensity factors of mode I and H are evaluated from the superposition integrals of the step response functions f...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Fracture Mechanics
سال: 2019
ISSN: 0013-7944
DOI: 10.1016/j.engfracmech.2019.02.031