Visualization of Combustion and CFD Study for NOx Reduction with Water Injection
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Urea Injection Design Analysis for NOx Control using CFD
There are many industrial pollutants produced from coal fired power generation plants. Recent legislation is pushing to reduce these emissions. Greenhouse gasses as well as nitrous oxides (NOX) and sulfur dioxide (SO2) are the targeted pollutants. Governmental legislation outlined by Environmental Protection Agency (EPA) through its Maximum Achievable Control Technology (MACT) guideline is a ma...
متن کاملNumerical Study of Reduction of NOx Emission by High Temperature Air Combustion Technology
A numerical study on Nox emission from an industrial furnace utilizing high temperature air combustion (HTAC) technology was done. The basic concept of the regenerative burner including heating a diluting of fresh air by flue gas was implemented in a two-dimensional furnace model. Governing equations in conjunction with a turbulence model and an overall chemistry model were solved using an impl...
متن کاملCFD Investigation into Diesel PCCI Combustion with Optimized Fuel Injection
A multi-pulse injection strategy for premixed charge compression ignition (PCCI) combustion was investigated in a four-valve, direct-injection diesel engine by a computational fluid dynamics (CFD) simulation using KIVA-3V code coupled with detailed chemistry. The effects of fuel splitting proportion, injection timing, spray angles, and injection velocity were examined. The mixing process and fo...
متن کاملLow NOx Combustion Technology for Minimizing NOx
A noble low NOx combustion technology, based on partial oxidation combustion concept in a fuel rich combustion zone, is successfully applied in this research. The burner is designed such that a portion of fuel is heated and pre-vaporized in the furnace then injected into a fuel rich combustion zone so that a partial oxidation reaction occurs. The effects of equivalence ratio, thermal load, and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Japan Institute of Marine Engineering
سال: 2006
ISSN: 1346-1427,1884-3778
DOI: 10.5988/jime.41.si_64