منابع مشابه
Studies on viscosity and fluidity of fluid resins.
The curing of fluid resins is performed by pouring the polymer-monomer mixture into molds made of hydrocolloid[1] or special plaster investment[2], before the fluidity of resin mixture disappears. Therefore, it can be said that the fluidity of resin mixture is an important factor which not only determines the pouring time but also is much related to the quality of the products. The viscosity of...
متن کاملCasein Viscosity Studies
1. Viscosity and pH curves of casein dissolved in NaOH, KOH, LiOH, and NH(4)OH are shown and it is found that a maximum viscosity occurs at about the same pH point with each alkali; i.e., 9.1 to 9.25. The magnitude of the viscosity is largest in ammonia solutions. 2. The maximum viscosity occurs in 8 to 10 per cent solutions of casein in alkalies when about 98 x 10(-5) gram equivalents of base ...
متن کاملAnalysis of Transient Rivlin-Ericksen Fluid and Irreversibility of Exothermic Reactive Hydromagnetic Variable Viscosity
This study analyzes the unsteady Rivlin-Ericksen fluid and irreversibility of exponentially temperature dependent variable viscosity of hydromagnetic two-step exothermic chemical reactive flow along the channel axis with walls convective cooling. The non-Newtonian Hele-Shaw flow of Rivlin-Erickson fluid is driven by bimolecular chemical kinetic and unvarying pressure gradient. The reactive flui...
متن کاملSynthesis of Alumina/Polyacrylamide nanocomposite and its influence on viscosity of drilling fluid
Maybe viscosity in drilling fluid is the most important parameter because cutting removal from well are task of viscose fluid. If viscosity of fluid is less than particular value, cutting will settle down in well and drilling operation will be stopped. In this study, synthesis of Alumina/Polyacrylamide nanocomposite through solution polymerization method was performed. Rheological behavior of m...
متن کاملSynthesis of Alumina/Polyacrylamide nanocomposite and its influence on viscosity of drilling fluid
Maybe viscosity in drilling fluid is the most important parameter because cutting removal from well are task of viscose fluid. If viscosity of fluid is less than particular value, cutting will settle down in well and drilling operation will be stopped. In this study, synthesis of Alumina/Polyacrylamide nanocomposite through solution polymerization method was performed. Rheological behavior of m...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Dairy Science
سال: 1933
ISSN: 0022-0302
DOI: 10.3168/jds.s0022-0302(33)93311-1