Virtual Crack Closure Technique on Delamination Fracture Toughness of Composite Materials Based on Epoxy Resin Filled with Micro-Scale Hard Coal
نویسندگان
چکیده
منابع مشابه
On the fracture toughness of ferroelastic materials
The toughness enhancement due to domain switching near a steadily growing crack in a ferroelastic material is analyzed. The constitutive response of the material is taken to be characteristic of a polycrystalline sample assembled from randomly oriented tetragonal single crystal grains. The constitutive law accounts for the strain saturation, asymmetry in tension versus compression, Bauschinger ...
متن کاملOn the Fracture Toughness of Advanced Materials
S E On the Fracture Toughness of Advanced Materials A R C H By Maximilien E. Launey, and Robert O. Ritchie* N E W S Few engineering materials are limited by their strength; rather they are limited by their resistance to fracture or fracture toughness. It is not by accident that most critical structures, such as bridges, ships, nuclear pressure vessels and so forth, are manufactured from materia...
متن کاملEpoxy Resin Composite Based on Functional Hybrid Fillers
A study was carried out involving the filling of epoxy resin (EP) with bentonites and silica modified with polyhedral oligomeric silsesquioxane (POSS). The method of homogenization and the type of filler affect the functional and canceling properties of the composites was determined. The filler content ranged from 1.5% to 4.5% by mass. The basic mechanical properties of the hybrid composites we...
متن کاملOn the velocity-dependent fracture toughness of epoxy resins
In a recent paper [1], Drs Selby and Miller described three methods of determining the fracture toughness (R), or equivalently, the fracture surface energy (23') for an epoxy resin. These methods are respectively (a) Berry's method, (b) Irwin-Kies equation and (c) Gurney's irreversible work area method. While the experimental data obtained from tapered double-cantilever beam (TDCB) specimens su...
متن کاملDetermination of Dynamic Delamination Toughness of a Graphite-Fiber/Epoxy Composite Using Hopkinson Pressure Bar
Modified dynamic three-point-bending and compact shearing test configurations based on Hopkinson pressure bar (HPB) and crack detection gage (CDG) (Vishay Intertechnology, Inc.) were used for the determination of the dynamic mode I and mode II delamination-initiation toughness of a unidirectional graphite-fiber/epoxy composite made of P7051S-20Q-1000 prepregs (Toray Composites America). The tra...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Physica Polonica A
سال: 2017
ISSN: 0587-4246,1898-794X
DOI: 10.12693/aphyspola.131.59