Vibratory cavitation erosion in aqueous solutions
نویسندگان
چکیده
منابع مشابه
Acoustic Cavitation Events During Microsecond Irradiation of Aqueous Solutions
The acoustic boundary conditions at the site of laser irradiation affects the onset of cavitation when stress-confined laser pulses are used. This study reports the thresholds for cavitation when the laser pulse length exceeds the stress confinement time by a factor of eight. The cavitation threshold was defined as the loss of an acoustic signal from the collapse of the cavitation bubble in roo...
متن کاملThe Volume Factor in Cavitation Erosion
Use of jet cavitation, however, occurs through an exit nozzle whose diameter can be changed, thereby changing volume with changing velocity. The results of such a change is shown to tie cavitation damage more powerfully to volume flow than to velocity. A specific example is in cavitation erosion of a high strength igneous rock which remained virtually undamaged at 70 MPa driving pressure but wa...
متن کاملComparison of cavitation erosion rate with liquid impingement erosion rate
Both cavitation erosion and liquid impingement erosion are phenomena that can cause pipe wall thinning in power plants. The Code for Power Generation Facilities, Rules on Pipe Wall Thinning Management, was published by the JSME (Japan Society of Mechanical Engineers) in 2005. The code says that cavitation erosion shall be prevented either in the design stage or by daily inspection. On the other...
متن کاملObservations of cavitation erosion pit formation.
Previous investigations showed that a single cavitation bubble collapse can cause more than one erosion pit (Philipp & Lauterborn [1]). But our preliminary study showed just the opposite - that in some cases a single cavitation pit can result from more than one cavitation event. The present study shows deeper investigation of this phenomenon. An investigation of the erosion effects of ultrasoni...
متن کاملTowards numerical prediction of cavitation erosion.
This paper is intended to provide a potential basis for a numerical prediction of cavitation erosion damage. The proposed method can be divided into two steps. The first step consists in determining the loading conditions due to cavitation bubble collapses. It is shown that individual pits observed on highly polished metallic samples exposed to cavitation for a relatively small time can be cons...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Wear
سال: 1983
ISSN: 0043-1648
DOI: 10.1016/0043-1648(83)90031-5