Vibrational Characteristics of Advanced Composite Laminates With a Hole.
نویسندگان
چکیده
منابع مشابه
Measurement of Variation in Fracture Strength and Calculation of Stress Concentration Factor in Composite Laminates with Circular Hole
In this research, residual strength and stress concentration factor of laminated composites with a circular open hole are studied analytically, numerically and experimentally. The numerical study was carried out using the finite element method. Moreover an analytical study was carried out with developing of point stress criterion. Mechanical testing was performed to determine the un-notched ten...
متن کاملCompressive Behavior of a Glass/Epoxy Composite Laminates with Single Delamination
The buckling and postbuckling behaviors of a composite beam with single delamination are investigated. A three-dimensional finite element model using the commercial code ANSYS is employed for this purpose. The finite elements analyses have been performed using a linear buckling model based on the solution of the eigenvalues problem, and a non-linear one based on an incremental-iterative method....
متن کاملEvaluation of Interlaminar Stresses in Composite Laminates with a Bolt-Filled Hole Using a Linear Elastic Traction-Separation Description
Determination of the local interlaminar stress distribution in a laminate with a bolt-filled hole is helpful for optimal bolted joint design, due to the three-dimensional (3D) nature of the stress field near the bolt hole. A new interlaminar stress distribution phenomenon induced by the bolt-head and clamp-up load, which occurs in a filled-hole composite laminate, is investigated. In order to e...
متن کاملDirect Composite Laminates - A Case Report
Rehabilitation of lost dental aesthetic is one of the most important concerns for contemporary dentistry. Conservative treatment modality along with aesthetic approaches, such as direct and indirect laminate veneer restorations were the treatment of choice. Laminate veneers are restorations to correct aesthetic deficiencies and discolorations. Direct laminate veneers involve the application of ...
متن کاملStress and Load-displacement Analysis of Fiber- Reinforced Composite Laminates with a Circular Hole under Compressive Load
This paper is focused on the analysis of stress-strain and displacement for compressive load on the fibrereinforced composite laminates. Three different orientations of fibers are analyzed with and without the circular cut-outs. Also different dimensions of circular cut-outs are applied on the laminates at different compressive loading conditions. This analysis is carried out using the finite e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1995
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.61.575