Vibration Suppression with Resettable Device
نویسندگان
چکیده
منابع مشابه
Vibration Suppression with Resettable Device
Novel low-power or semiactive devices are developed for vibration suppression applications. By manipulating the structural stiffness, the resisting forces generated by the devices are quite large and independent of velocity. Experimental results are presented to demonstrate the feasibility of the devices and to justify the main assumptions used. The critical design issue of device placement is ...
متن کاملAn electromagnetic inerter-based vibration suppression device
This paper describes how an inerter-based device for structural vibration suppression can be realized using an electromagnetic transducer such as a linear motor. When the motor shaft moves, a difference of voltage is generated across the transducer coil. The voltage difference is proportional to the relative velocity between its two terminals. The electromagnetic transducer will exert a force p...
متن کاملVibration Suppression with Approximate Finitedimensional
Based on a distributed parameter model for vibrations, an approximate nite dimensional dynamic compensator is designed to suppress vibrations (multiple modes with a broad band of frequencies) of a circular plate with Kelvin-Voigt damping and clamped boundary conditions. The control is realized via piezoceramic patches bonded to the plate and is calculated from information available from several...
متن کاملVibration suppression with fractional-order PIλDμ controller
Cantilever beams have an important role in day to day life in bridges, towers, buildings and aircraft wings, making active vibration suppression a highly researched field. The purpose of this paper is to detail the design of fractional order PID controllers for smart beams. A novel tuning procedure is proposed based on solving a set of nonlinear complex equations that directly aim at reducing t...
متن کاملA Vibration Suppression Device of Single-Link Flexible Manipulator and Its Control Algorithm
A device which comprises three parts, electromotor, screw and cable, is proposed to suppress the vibration of a single-link flexible manipulator. The manipulator acted on jointly by the device and the load at manipulator’s end-effector is modeled as a cantilever beam with three concentrated loads at two end-points and midpoint. By taking the exserted length of the screw as control variable, the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Engineering Mechanics
سال: 2002
ISSN: 0733-9399,1943-7889
DOI: 10.1061/(asce)0733-9399(2002)128:9(916)