Vibration of Thin Walls during Cutting Process of 7075 T651 Aluminium Alloy
نویسندگان
چکیده
منابع مشابه
A Study on Effect of Process Parameters on the Expansion of Thin Walled Aluminium 7075 Tubes
This paper deals with the effect of process parameters on the peak load and the energy absorption of the expansion of thin walled tubes using a die. The energy absorption and peak load during the expansion process were calculated for various punch angles (α) and with different expansion ratios (rp/ro) at different temperatures (T) by finite element analysis where rp is the punch outer radius an...
متن کاملApplication of the GTN Model in Ductile Fracture Prediction of 7075-T651 Aluminum Alloy
In this paper the capability of Gurson-Tvergaard-Needleman (GTN) model in the prediction of ductile damage in 7075-T651 aluminum alloy is investigated. For this purpose, three types of specimens were tested: Standard tensile bars, Round notched bar (RNB) specimens and compact tension (C(T)) specimens. Standard tensile bar tests were used to obtain the mechanical properties of the material and t...
متن کاملExtrusion of 7075 aluminium alloy through double-pocket dies to manufacture a complex profile
Low-temperature incipient melting and high deformation resistance of aluminium alloy AA7075 place extraordinary demands on extrusion die design and process optimization, especially when the shape of the extrudate is complex. The present case study was aimed at combining the considerations on die design and process optimization for the alloy to manufacture a complex solid profile with large diff...
متن کاملTENSILE AND FRACTURE CHARACTERISTICS OF A SIC- PARTICLE-REINFORCED 7075 ALUMINIUM ALLOY
Fracture behavior of a 7075 aluminium alloy reinforced with 15 Vol%. SiC particles was studied after T6 and annealing heat treatments under uniaxial tensile loading at room temperature. The scanning electron microscopy of fractured surfaces and EDS analysis showed:, that fracture mechanism changed from due mainly to fractured particle in T6 condition to interface decohesion in samples in anneal...
متن کاملevaluation of fatigue life of friction stir welded 7075-t651 aluminum alloy joints
abstract – aluminium 7075- t651 alloys are widely used in the production of light weight structures requiring a high strength to weight ratio and high corrosion resistance. the effect of processing parameters on fatigue life of 7075- t651 aluminium joints produced by friction stir welding was investigated in the present study. welding samples were made by employing rotating tool speed of 770, 9...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Manufacturing Technology
سال: 2016
ISSN: 1213-2489,1213-2489
DOI: 10.21062/ujep/x.2016/a/1213-2489/mt/16/1/113