Vibration Monitoring and Inter-Electrode Gap Controlling of Synchronizing Ultrasonic Compound Electric Machining
نویسندگان
چکیده
منابع مشابه
Ultrasonic Vibration Assisted Electro-Discharge Machining
An ultrasonic vibration has been superposed on the normal electrode movement to increase the flushing effect during a micro electro-discharge machining (EDM) process. A systematic study on the effects of ultrasonic vibration on the EDM performance for fabricating microholes in Nitinol has been completed. The introduction of ultrasonic vibration to the microEDM process has more than 60 times inc...
متن کاملCharacteristics of Longitudinal and Torsional Vibration for Hole Machining by Ultrasonic Vibration
We are developing a new method using ultrasonic longitudinal and torsional vibration of a hollow-type stepped horn for hole machining. We foresee that the equipment can be simplified and miniaturized. In this paper, ultrasonic vibration sources of a hollow-type stepped horn without a diagonal slits vibration converter and with a diagonal slits vibration converter are used. The longitudinal and ...
متن کاملFEM Modeling of Ultrasonic Vibration Assisted work-piece in EDM Process
In Electrical Discharge Machining, oxides (or debris) are created and accumulated in the sparking gap between an electrode and a work piece. If the debris density becomes too great in certain points in the gap, there is a reduction in the resistance, which encourages the formation of abnormal discharges, results in significant electrode damage and slows down the material removal rate. To enhanc...
متن کاملVibration suppression in ultrasonic machining described by non-linear differential equations via passive controller
Vibrations are usually undesired phenomena as they may cause damage or destruction of the system. However, sometimes they are desirable, as in ultrasonic machining (USM). In such case, the problem is a complicated one, as it is required to reduce the vibration of the machine head and have reasonable amplitude for the tool. In the present work, the coupling of two non-linear oscillators of the t...
متن کاملInvestigation of Electric Discharge Machining of Inconel 718 Using Special Graphite Electrode
Electric Discharge Machining is a non-conventional machining process, used to machining difficult to machine materials. The major problem faced while doing EDM is high tool wear rate, end wear, corner wear , surface roughness and low material removal rate,. In this research work experimental investigations have been made to find the machining characteristics of high density ultra fine graphite ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanical Engineering and Technology
سال: 2015
ISSN: 2167-6631,2167-6623
DOI: 10.12677/met.2015.44026