Vibration Mode Analysis of ANSYS WORKBENCH-Based Garden Blower Impeller

Component Mode Synthesis in ANSYS Workbench Simulation

At ANSYS Workbench 11.0, the ANSYS Rigid Dynamics add-on module enables users to define joint connections in complex kinematic assemblies. This ability to model rigid and flexible parts in ANSYS Workbench Simulation via joints is beneficial since the rigid parts are modeled with mass and rigid links (that is, rigid contact elements), thus providing load transfer capabilities and allowing users ...

ANSYS Workbench User's Guide

Finite Element Analysis Of Disc Brake By ANSYS Workbench

The brakes must be strong enough to stop the vehicle within a minimum distance in an emergency. The driver must have proper control over the vehicle during emergency braking and vehicle must not skid. The brakes must have good antedate characteristics their effectiveness should not decrease with prolonged application and thus it demand that the cooling of the brakes should be very efficient. Fo...

Analysis of active vibration control in smart structures by ANSYS

It is possible to model smart structures with piezoelectric materials using the product ANSYS/Multiphysics. In this study, the integration of control actions into the ANSYS solution is realized. First, the procedure is tested on the active vibration control problem with a two-degrees of freedom system. The analytical results obtained by the Laplace transform method and by ANSYS are compared. Th...

Impeller Rerate to Reduce Hydraulically Generated Vibration

The vibration of centrifugal pumps, running at both best efficiency point (BEP) and at low flow, is of interest to both pump designers and users. This vibration is responsible for the poor seal and bearing life and reduced mean time between failure (MTBF). The cause of vane pass vibration and multiples of this are explained in this paper. The causes of low flow vibrations are also explored. The...