Vibration level induced by the friction of two rough surfaces weakly loaded
نویسندگان
چکیده
This paper presents an experiment to measure the vibration level generated when a light solid slides over dry and rough surface. The experimental set-up is based on linear constant motion with speed range from 1 1000 mm/sec. aim study evolution of as function sliding friction area. Measurements show that logarithmic increasing transient velocity. It also observed two regimes exist for versus apparent contact On one hand proportional area, but other this constant.
منابع مشابه
Phase transition of the dry friction between crystalline surfaces induced by normal load
A major source of energy dissipation and surface wear is the kinetic friction at the interfaces of sliding bodies. Traditionally, on a macroscopic scale, this undesirable effect is reduced with lubricating the surfaces by introducing oil into their interface. An interesting phenomenon, called superlubricity, has been reported on a nanometer scale where dry (without lubricant oil) fruition and w...
متن کاملNano-Scale Effect in Adhesive Friction of Sliding Rough Surfaces
Study of contact and friction at multiple length scales is necessary for the effective design and analysis of surfaces in sliding microand nano-electromechanical systems (MEMS/NEMS). As loading forces decrease in such applications, the size of the asperity contacts tends to decrease into the nano scale regime. Also with the increase in surface area to volume ratio in such systems, the surface f...
متن کاملA numerical model of friction between rough surfaces
This paper describes a computational method to calculate the friction force between two rough surfaces. In the model used, friction results from forces developed during elastic deformation and shear resistance of adhesive junctions at the contact areas. Contacts occur between asperities and have arbitrary orientations with respect to the surfaces. The size and slope of each contact area depend ...
متن کاملA Static Friction Model for Elastic-Plastic Contacting Rough Surfaces
A model that predicts the static friction for elastic-plastic contact of rough surfaces is presented. The model incorporates the results of accurate finite element analyses for the elastic-plastic contact, adhesion and sliding inception of a single asperity in a statistical representation of surface roughness. The model shows strong effect of the external force and nominal contact area on the s...
متن کاملcontrol of the optical properties of nanoparticles by laser fields
در این پایان نامه، درهمتنیدگی بین یک سیستم نقطه کوانتومی دوگانه(مولکول نقطه کوانتومی) و میدان مورد مطالعه قرار گرفته است. از آنتروپی ون نیومن به عنوان ابزاری برای بررسی درهمتنیدگی بین اتم و میدان استفاده شده و تاثیر پارامترهای مختلف، نظیر تونل زنی(که توسط تغییر ولتاژ ایجاد می شود)، شدت میدان و نسبت دو گسیل خودبخودی بر رفتار درجه درهمتنیدگی سیستم بررسی شده اشت.با تغییر هر یک از این پارامترها، در...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NOISE-CON ... proceedings
سال: 2021
ISSN: ['0736-2935']
DOI: https://doi.org/10.3397/in-2021-1795