Vibration and noise analysis of acetoxime modified TiO2 coating over steel alloy
نویسندگان
چکیده
The analysis of vibration over coated sample is required to investigate the and noise damping behaviors coatings. In this research work, conventional gun spray method used coat oxime modified titanium (IV) isopropoxide on steel find out behaviour coating. most modal measure bare titania samples. During test it was observed that a thin coating has improved when compare with sample. surface morphology samples by Scanning Electron Microscopy (SEM), Energy Dispersive X-ray Analysis (EDX) Atomic Force (AFM) revealed thickness composition results shows TiO2 deposited alloy spry uniform, homogenous, crack free, having high behavior.
منابع مشابه
Free vibration analysis of steel framed structures
This study based on free vibration analysis and study the behavior of framed structure under different frequency of vibration using ANSYS software and shaking table. A small scale uni-axial shaking table was prepared in laboratory, which can produce lower to moderate vibration, regarding frequency and velocity. Moment resisting framed structures constructed with connecting beam and column eleme...
متن کاملElectrochemical Noise Analysis of Anaerobic (Bacterial) Corrosion of Steel
Corrosion of structural steel in an SRB containing environment for as long as 9 months, is studied using the Electrochemical Noise Analysis technique. The results show that the activity of the system, which was very low initially, started to increase after 6 months exposure to the environment. The power spectral density curves of the Electrochemical Potential Noise of the system, using the maxi...
متن کاملHealth Monitoring of Welded Steel Pipes by Vibration Analysis
In the present work, structure health monitoring (SHM) of welded steel pipes was used to diagnosis their state via vibration based damage detection techniques. The dynamic quantities such as Frequency Response Functions (FRFs), mode shapes and modal parameters from structural vibration to detect damage were measured, set on linear averaging mode, with a maximum frequency of analysis of 3.2 kHz....
متن کاملInvestigation of Hardness, Morphology and Structural Analysis of NiCrBSi Composite Coating on Plain Carbon Steel
High velocity oxy-fuel (HVOF) is one of the emerging technologies among the thermal spraying techniques, for producing uniform and dense coatings, having high hardness and very low porosity. A NiCrBSi alloy coating was prepared with approximately 400µm thick, on the A516 steel by means of HVOF and was analyzed with regard to its detailed microstructures, phase formation, thickness, roughness an...
متن کاملA new corrosion protection coating with polyaniline–TiO2 composite for steel
Organic coating strategies for corrosion protection with inherently conducting polymers have become important because of restriction on the use f heavy metals and chromates in coatings due to their environmental problems. This work presents the synthesis of polyaniline–TiO2 composites PTC) and the corrosion protection behaviour of PTC containing coating on steel. PTC was prepared by chemical ox...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal On Interactive Design And Manufacturing (ijidem)
سال: 2022
ISSN: ['1955-2505', '1955-2513']
DOI: https://doi.org/10.1007/s12008-022-01023-8