Vibration Analysis of Reinforced Concrete Simply Supported Beam versus Variation Temperature
نویسندگان
چکیده
منابع مشابه
Tapered Polymer Fiber Sensors for Reinforced Concrete Beam Vibration Detection
In this study, tapered polymer fiber sensors (TPFSs) have been employed to detect the vibration of a reinforced concrete beam (RC beam). The sensing principle was based on transmission modes theory. The natural frequency of an RC beam was theoretically analyzed. Experiments were carried out with sensors mounted on the surface or embedded in the RC beam. Vibration detection results agreed well w...
متن کاملVibration Suppression of Simply Supported Beam under a Moving Mass using On-Line Neural Network Controller
In this paper, model reference neural network structure is used as a controller for vibration suppression of the Euler–Bernoulli beam under the excitation of moving mass travelling along a vibrating path. The non-dimensional equation of motion the beam acted upon by a moving mass is achieved. A Dirac-delta function is used to describe the position of the moving mass along the beam and its iner...
متن کاملBending Characteristics of a Post-Tensioned, Prestressed Concrete, Simply Supported Beam
Results and Conclusion: The analysis results show that the cracking deflection of the prestressed, concrete beams increases with the increase in the porosity of the grouting material of the beams under different load forms. By contrast, under the same porosity grouting material, the cracking deflection of the symmetrical loads is larger than that of the uniform and concentrated loads. As the po...
متن کاملTransverse Vibration of a Simply Supported Beam with Symmetric Overhang of Arbitrary Length
The numerical solution to the frequency equation for the transverse vibration of a simple beam with symmetric overhang is found. The numerical results converge to the analytical solutions for the two limiting cases of a beam with no overhang and a beam with no span and agree with the case in which the supports are at the nodal points of a freely vibrating beam. An approximation to the solution ...
متن کاملModeling of a reinforced concrete beam subjected to impact vibration using ABAQUS
A 3D finite element (FE) analysis technique using ABAQUS is chosen to explore the dynamic behavior of a beam under impact load. A beam, for which the impact dynamic test was conducted by Kishi (2004), is selected to develop a solid element FE model. FE analyses were performed implementing ABAQUS Explicit (2004) programming tool to predict the dynamic responses under the pressure amplitude intro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Shock and Vibration
سال: 2017
ISSN: 1070-9622,1875-9203
DOI: 10.1155/2017/4931749