Vibration Analysis of Asymmetric-Plan Frame Buildings Using Transfer Matrix Method
نویسندگان
چکیده
منابع مشابه
Transfer Matrix Method for Natural Vibration Analysis of Tree System
The application of Transfer matrix method TMM ranges from linear/nonlinear vibration, composite structure, and multibody system to calculating static deformation, natural vibration, dynamical response, and damage identification. Generally TMM has two characteristics: 1 the TMM formulae share similarity to the chain mechanics model in terms of topology structure; then TMM often is selected as a ...
متن کاملExtension of Direct Displacement-Based Design to Plan-Asymmetric RC Frame Buildings
The object of this paper is the evaluation of the seismic response of reinforced concrete frames designed according to the DDBD (direct displacement-based design) approach. The great part of research works about DDBD has been dedicated to planar frames, but recently also some proposals for 3D structures have been presented, in particular for wall structures. This paper will give a further contr...
متن کاملdynamic analysis of semiconductor laser amplifier using transfer matrix method
transfer matrix method (tmm) has been applied to analyze characteristics of semiconductor laser optical amplifiers. the input signal is sinusoidal modulating wave and we do not assume the modulating bias signal as well. we have shown that the distoration arises from gain modulation at low modulation frequencies, but in microwave modulation frequencies, the gain takes an average value and the re...
متن کاملDynamic Analysis of Offshore Wind Turbine Towers with Fixed Monopile Platform Using the Transfer Matrix Method
In this paper, an analytical method for vibrations analysis of offshore wind turbine towers with fixed monopile platform is presented. For this purpose, various and the most general models including CS, DS and AF models are used for modeling of wind turbine foundation and axial force is modeled as a variable force as well. The required equations for determination of wind turbine tower response ...
متن کاملDUAL-LEVEL ApPROACH FOR SEISMIC DESIGN OF ASYMMETRIC-PLAN BUILDINGS
Buildings should be designed to resist moderate ground motion with out structural damage and resist intense ground motion with controlled damage. However, most codes do not consider both these requirements explicitly and specify a single design earthquake that generally corresponds to intense ground motion. Investigated in this study is the response of one-story, asymmetric-plan systems design...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical and Computational Applications
سال: 2010
ISSN: 2297-8747
DOI: 10.3390/mca15020279