Vibration absorber design to suppress regenerative chatter in nonlinear milling process: Application for machining of cantilever plates
نویسندگان
چکیده
منابع مشابه
Nonlinear Vibration Analysis of a cantilever beam with nonlinear geometry
Analyzing the nonlinear vibration of beams is one of the important issues in structural engineering. According to this, an impressive analytical method which is called Modified Iteration Perturbation Method (MIPM) is used to obtain the behavior and frequency of a cantilever beam with geometric nonlinear. This new method is combined by the Mickens and Iteration methods. Moreover, this method don...
متن کاملDesign Procedure of a Nonlinear Vibration Absorber Using Bifurcation Analysis
A nonlinear energy sink (NES) is characterized by its ability to passively realize targeted energy transfer as well as multimodal damping. This latter feature seems to make this device very well suited for reducing the vibration level of MDOF linear structures. The perspective of dealing with MDOF linear primary structures requires the development of an efficient NES design procedure. This pape...
متن کاملDesign and Analysis of a Simple Nonlinear Vibration Absorber
In this work, a system consisting of a main structure with a nonlinear tuned vibration absorber having a hardening spring attached to it is considered. The nonlinearity in the absorber's spring is a cubic nonlinearity and is obtained by attaching two additional, relatively soft, similar linear springs to the absorber's mass. These added springs are attached to the absorber's mass in such a way ...
متن کاملPrediction of Chatter in CNC Machining based on Dynamic Cutting Force for Ball End Milling
This paper presents the suitable depth of cut, spindle speed and feed rate that will be chosen during machining. If thus parameters are not considered, this can provoke abnormal tool behavior such as chatter. Chatter will limit the tool life which only can be use for just a few times. To predict the chatter occurs, the parameters will be use are spindle speed, depth of cut and feed rate. CNC ma...
متن کاملStudy the Effects of Nano Fluid as a Coolant in Milling Process for Improving Machining Parameters
The aim of this research work is to evaluate the effects of coolant including nano- powder material for the cooling purpose in milling process and comparing the results with the conventional coolant. Generation heat and weak heat transfer reduces the tool life and also deteriorate surface roughness during milling operation. To overcome this problem, it is necessary to use coolant for cooling as...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mathematical Modelling
سال: 2015
ISSN: 0307-904X
DOI: 10.1016/j.apm.2014.06.010