Vertical Vibrations Effect on Forced convection heat transfer from a Longitudinal Finned Tube
نویسندگان
چکیده
منابع مشابه
Characteristics of forced convection heat transfer in vertical internally finned tube
This work presents a numerical investigation of a vertical internally finned tube subjected to forced convection heat transfer. The governing equations were solved numerically using the control volume technique. Nusselt number, Nu, and friction factor multiplied by Reynolds number, fRe, are influenced greatly by the height and number of the radial fins. The velocity and temperature distribution...
متن کاملForced Convection Model Of Fan Plate-Finned Tube Type Heat Exchanger At Low Reynolds Numbers
The forced convection experiment of fan plate-finned tube heat exchangers which are mainly used in air conditioners and the forced convection model have been studied for which the heat transfer effect of this type exchangers has not been proposed by a model. All measurements were made when there is no refrigerant flow in the pipe at Reynolds's number of 580. According to the experiment results,...
متن کاملNatural convection and radiation heat transfer of an externally-finned tube vertically placed in a chamber
A three-dimensional numerical study was made to investigate effects of fin angle, fin surface emissivity, and tube wall temperature on heat transfer enhancement for a longitudinal externally-finned tube placed vertically in a small chamber. The numerical model was first validated through comparison with experimental measurements and the appropriateness of general boundary conditions was examine...
متن کاملNatural Convection Heat Transfer From Horizontal Cylinders in a Vertical Arra Confined Between Parallel Walls
Laminar natural convection from an array of horizontal isothermal cylinders confined between two vertical walls, at low Rayleigh numbers, is investigated by theoretical and numerical methods. The height of the walls is kept constant, however, number of the cylinders and their spacing, the distance between the walls and Rayleigh number have been varied. The optimal spacing (confining walls) and ...
متن کاملHeat Transfer from Finned Surfaces
conv hAs (Ts T ) where As is the heat transfer surface area and h is the convection heat transfer coefficient. When the temperatures Ts and T are fixed by design considerations, as is often the case, there are two ways to increase the rate of heat transfer: to increase the convection heat transfer coefficient h or to increase the surface area As. Increasing h may require the installation of a p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2021
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/1062/1/012007