VERIFIKASI PROGRAM PWR-FUEL DALAM MANAJEMEN BAHAN BAKAR PWR
نویسندگان
چکیده
منابع مشابه
Improved PWR Core Characteristics with Thorium-containing Fuel
Thorium is an element for possible use as nuclear fuel, because of the fertile property of Th-232, which could convert into U-233 after neutron capture and beta decays. However, thorium based fuels have not been successfully implemented, because of the high cost and the higher complexity compared with once-through uranium fuel. Therefore, the focus of this thesis is on thorium for use in tradit...
متن کاملFission Gas Release Comparison for PWR Duplex Fuel Pellets
Current research has identified Duplex pellets as an effective strategy for decreasing the centerline temperature of the fuel. However, before this design can be widely utilized several areas, including fission gas release, need to be better characterized. Therefore, this paper seeks to ascertain the relative difference in fission gas release between a standard solid UO2 reference design and a ...
متن کاملThe Czech National R&d Program of Nuclear Incineration of Pwr Spent Fuel in a Transmuter with Liquid Fuel
The principle drawbacks of any kind of solid nuclear fuel are listed and briefly analysed in the first part of the paper. On the basis of this analysis, the liquid fuel concept and its benefits are introduced and briefly described in the following parts of the paper allowing to develop new reactor systems for nuclear incineration of spent fuel from conventional reactors and a new clean source o...
متن کاملThe Use of Self-Induced XRF to Quantify the Pu Content in PWR Spent Nuclear Fuel
The development of techniques for the accurate quantification of the plutonium content in spent nuclear fuel would provide significant advances for shipper/receiver differences and for input accountability at reprocessing facilities. Several techniques have been studied previously for achieving this goal but these have met with limited success. Due to the radioactive nature of spent fuel, decay...
متن کاملCfd Prediction of Pressure Drop for the Inlet Region of a Pwr Fuel Assembly
Computational Fluid Dynamics (CFD) has been widely used in pressure drop/hydraulic loss calculations in many industries, including the aerospace and turbo-machinery industry as well as in the nuclear power industry. During the past 30 years, a significant amount of time and effort have been spent in benchmarking the CFD tools and models against test data in aerospace and turbo-machinery industr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Jurnal Sains dan Teknologi Nuklir Indonesia
سال: 2015
ISSN: 1411-3481,1411-3481
DOI: 10.17146/jstni.2015.16.1.2357