VELOCITY AND PRESSURE FIELD OF SPILLING BREAKERS
نویسندگان
چکیده
منابع مشابه
The 3D Structure of Spilling Breakers
Nearly all calculations and measurements of breaking waves assume the wave profiles and flow fields are two-dimensional. Though this assumption may be correct before the waves become turbulent, once transition to turbulent flow begins, the real flow becomes highly three dimensional. The threedimensional structure and motion of the free surface is important for the dynamics of the breaking proce...
متن کاملEvaluation of turbulence closure models under spilling and plunging breakers in the surf zone
Turbulence closure models are evaluated for application to spilling and plunging breakers in the surf zone using open source computational fluid dynamics software. A new library of turbulence models for application to multiphase flows has been developed and is assessed for numerical efficiency and accuracy by comparing against existing laboratory data for surface elevation, velocity and turbule...
متن کاملa boundary integral model for simulating spilling breakers
a boundary integral method is used to simulate spilling breakers. the bottom is also included inthe introduced closed boundary and the problem is directly solved in the physical plane. the method has beenshown to be remarkably stable, and no numerical instability has occurred in any of the calculations. theresults reveal that both the momentum and total energy are almost constant in time during...
متن کاملSound field separation with sound pressure and particle velocity measurements.
In conventional near-field acoustic holography (NAH) it is not possible to distinguish between sound from the two sides of the array, thus, it is a requirement that all the sources are confined to only one side and radiate into a free field. When this requirement cannot be fulfilled, sound field separation techniques make it possible to distinguish between outgoing and incoming waves from the t...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Coastal Engineering Proceedings
سال: 1980
ISSN: 2156-1028,0589-087X
DOI: 10.9753/icce.v17.33