Vehicle Front Structure Energy Absorbing Optimization in Frontal Impact
نویسندگان
چکیده
منابع مشابه
Vehicle Front Structure Energy Absorbing Optimization in Frontal Impact
Energy absorption performance is one of the most important indexes in the vehicle safety during impact. Research on the car frontal structure energy performance and structure optimization was conducted in this paper. Whole vehicle model was established by HyperMesh and simulated in LS-DYNA. Simulation results indicated that modification was need for the original structure to meet requirement. B...
متن کاملSevere Impact on the Behavior of Energy Absorbing Cylindrical Base in Frontal Impact
In this paper, the vibration characteristics of multi-layer shell that internal and external surfaces with a layer of piezoelectric sensor and actuator is investigated. The backrest shell laminated with simple analytical method to evaluate and the results were compared with results obtained by other researchers. The numerical solution methods (GDQ) for shells with piezoelectric layers and plain...
متن کاملAnalysis of Vehicle Seat and Research on Structure Optimization in Front and Rear Impact
This paper used the Hyper Mesh and LS-DYNA software to establish a dummy-seat finite element simulation model. The head, chest and neck injury of the dummy were analyzed respectively in the frontal impact and rear impact. It was indicated that modification of seat was needed to meet the requirements. The simulation results showed that the original model cannot provide effective protection for t...
متن کاملOptimization of Crush Initiators on Steel Front Rail of Vehicle
This paper focuses on the optimization of initiating dimensions of groove bearing in association with de- sired design of vehicle’s front structure which is made up of low carbon steels in the case of frontal collision. Axial bearing analysis is done numerically using nonlinear finite element code LS-DYNA. In this analysis, changes of two main parameters including measure of energy absorp...
متن کاملeconomic optimization and energy consumption in tray dryers
دراین پروژه به بررسی مدل سازی خشک کردن مواد غذایی با استفاده از هوای خشک در خشک کن آزمایشگاهی نوع سینی دار پرداخته شده است. برای آنالیز انتقال رطوبت در طی خشک شدن به طریق جابجایی، یک مدل لایه نازک برای انتقال رطوبت، مبتنی بر معادله نفوذ فیک در نظر گفته شده است که شامل انتقال همزمان جرم و انرژی بین فاز جامد و گاز می باشد. پروفایل دما و رطوبت برای سه نوع ماده غذایی شامل سیب زمینی، سیب و موز در طی...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Open Mechanical Engineering Journal
سال: 2015
ISSN: 1874-155X
DOI: 10.2174/1874155x01509010168