VaRTM Process of Composites Using Porous Mold
نویسندگان
چکیده
منابع مشابه
Capillary Effects on Surface Enhancement in a Non-Homogeneous Fibrous Porous Medium
The evaluation of a free fluid surface in a porous medium has several mathematical applications that are important in industries using molds, particularly in the fluid injection process. The vacuum-assisted resin transfer molding (VARTM) process is a promising technology in the primary composite industry. An accurate computational simulation of the VARTM process would be a cost-effective tool i...
متن کاملImproving the Performance of Porous Concrete Composites Using Zeolite as a Coarse Grain
Porous concrete is a mixture of cement and water that may contain fine grains, which play a role in water transfer and permeability. Porous concrete can act as a drain to pass rainwater and recharge groundwater. In this study, 25%, 50%, 75%, and 100% zeolite were used to replace the coarse aggregates in porous concrete. The effects of the zeolite on the compressive strength, permeability coeffi...
متن کاملCarbon Nanotube-Based Composites Synthesized Using Porous Aluminum Oxide
Devices on the basis of carbon nanotube (CNT) were not used extensively up to date [6]. That is connected with a problem of receiving the reliable, corresponding to the sizes and properties of CNT, electrode systems [7]. As a rule, usually represented CNT-devices contain other elements of the scheme, including electrodes, of the micron size. In devices on the base of CNT-array, electrodes can h...
متن کاملMOLD FILLING BEHAVIOR OF DOUBLE GATING SYSTEM IN ALUMINUMLFC PROCESS
The mold-filling behavior in the casting of aluminum alloy (A413) using lost foam casting (LFC) was explored. The effects of gate numbers, type of gating and casting thickness on the filling behavior were evaluated. Although, unlike convectional casting process, the gating system showed little effect onfilling ability, casting thickness created a greater effect on the mold filling. In contrast ...
متن کاملVARTM Variability and Substantiation
Vacuum-assisted resin transfer molding (VARTM) has the potential advantages of relatively low cost processing with sufficiently high volume fractions of reinforcement and can be readily applied to large-scale structures. However, for many aircraft applications, VARTM does not currently provide sufficient repeatability or control of variability. Such variability is commonly observed when process...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Composite Materials
سال: 2013
ISSN: 0385-2563,1884-8559
DOI: 10.6089/jscm.39.31