Validation of a cyclic plasticity computational method using fatigue full-field deformation measurements

Cyclic plasticity and fatigue of metals

A Strain Range Dependent Cyclic Plasticity Model

Hysteresis loop curves are highly important for numerical simulations of materials deformation under cyclic loadings. The models mainly take account of only the tensile half of the stabilized cycle in hysteresis loop for identification of the constants which don’t vary with accumulation of plastic strain and strain range of the hysteresis loop. This approach may be quite erroneous particularly ...

buckling of viscoelastic composite plates using the finite strip method

در سال های اخیر، تقاضای استفاده از تئوری خطی ویسکوالاستیسیته بیشتر شده است. با افزایش استفاده از کامپوزیت های پیشرفته در صنایع هوایی و همچنین استفاده روزافزون از مواد پلیمری، اهمیت روش های دقیق طراحی و تحلیل چنین ساختارهایی بیشتر شده است. این مواد جدید از خودشان رفتارهای مکانیکی ارائه می دهند که با تئوری های الاستیسیته و ویسکوزیته، نمی توان آن ها را توصیف کرد. این مواد، خواص ویسکوالاستیک دارند....

Calibration of Hardening Rules for Cyclic Plasticity

In the realm of multi-axial ratcheting, a step by step mathematical approach is developed for the parameter determination of decomposed kinematic hardening rules. For this purpose, key characteristics are mathematically derived for these hardening rules under multi-axial loading. These characteristics are then utilized to develop expressions which relate the loading history to the accumulated p...

Full field measurements of anisotropic stress intensity factor ranges in fatigue

The effects of anisotropy during mixed mode fatigue crack growth were studied in single crystal 316L stainless steel. An anisotropic least-squares regression algorithm using displacements from digital image correlation was developed to find the effective stress intensity factors, KI and KII, and the T-stress. Crack tip plastic zones were determined using an anisotropic yield criterion. Strains ...