منابع مشابه
Development of an automatic vacuum degassing system and parameters optimization for degassing process
Rapid tooling technology is regarded as an important method of reducing the cost and time to market in a new product development process. Silicone rubber mold is frequently used in indirect tooling. Automatic vacuum casting system is widely used to degas in the manufacturing of silicon rubber mold, but the cost of hardware is very expensive. A low-cost automatic vacuum degassing system is desig...
متن کاملModeling of acetylene pyrolysis under steel vacuum carburizing conditions in a tubular flow reactor.
In the present work, the pyrolysis of acetylene was studied under steel vacuum carburizing conditions in a tubular flow reactor. The pyrolysis temperature ranged from 650 degrees C to 1050 degrees C. The partial pressure of acetylene in the feed mixture was 10 and 20 mbar, respectively, while the rest of the mixture consisted of nitrogen. The total pressure of the mixture was 1.6 bar. A kinetic...
متن کاملProcess-time Optimization of Vacuum Degassing Using a Genetic Alloy Design Approach
This paper demonstrates the use of a new model consisting of a genetic algorithm in combination with thermodynamic calculations and analytical process models to minimize the processing time during a vacuum degassing treatment of liquid steel. The model sets multiple simultaneous targets for final S, N, O, Si and Al levels and uses the total slag mass, the slag composition, the steel composition...
متن کاملThe structure-property relationship in a desulfurised and degassing hot work W500 tool steel
The effect of secondary steelmaking processes such as desulphurization, removal of inclusions and vacuum degassing followed by hot forging and hardening heat treatment on the microstructure and mechanical properties of a hot-work w500 tool steel have been studied in details. In order to follow the progress of secondary steel making, the content of impurity elements such as S, P, O, H and N were...
متن کاملAir Flow through Woven Stainless Steel Mesh
It was known that a mesh screen placed across an airflow will have an evening effect, distributing both the velocity and pressure across the screen, however this effect had not been quantified and the effect of different mesh geometries was unknown. It was desired to understand the relationship between airflow velocity, the pressure behind the screen and the free hole area of the screen. It was...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOM
سال: 1958
ISSN: 1047-4838,1543-1851
DOI: 10.1007/bf03398231