UV-visible digital imaging of split injection in a Gasoline Direct Injection engine
نویسندگان
چکیده
منابع مشابه
Effect of Direct Injection Diesel Engine Convert to Sequential Injection CNG Engine in Intake Port Gas Flow Pressure Profile
The one dimension computational model of a sequential injection engine, which runs on compressed natural gas (CNG) with spark ignition, is developed for this study, to simulate the performance of gas flow pressure profile, under various speed conditions. The computational model is used to simulate and study of the steady state and transient processes of the intake manifold. The sequential injec...
متن کاملModeling and Programming for a Computer Controlled Direct Gasoline Fuel Injection System of SI Engine
A computer controlled direct gasoline fuel injection (DGI) system has been modeled, programmed and constructed for a four-stroke SI engine. Locally available materials have been used for this experimental model. All the old model vehicle were equipped with carburetor for air fuel mixing and later on electronic fuel injection system has been introduced for maintaining better air fuel ratio and m...
متن کاملFuel Rail Pressure Rise during Cold Start of a Gasoline Direct Injection Engine
Gasoline direct injection provides reduced engine emissions, increased power, and increased fuel economy as compared to port fuel injection (PFI). Reduced emissions are largely due to starting the engine using high fuel pressure (up to 150 bar) and injecting into the compression stroke. During a cold start, fuel pressure must be increased from lift pump pressure (typically 4 to 6 bar) to desire...
متن کاملThe Effect of Injection Timing and Phasing on the Emission of a Gasoline Single Cylinder Engine
Performance evaluation of Internal Combustion Engines (ICEs) and setting different emission standards has manifested the importance of pollution reduction as well as the optimal fuel consumption of these engines. Accordingly, the Engine Management Systems (EMS) are utilized which resulted in optimizing the power alongside the decrease in pollutant emission, through preparing the appropriate air...
متن کاملInfluence of Fuel Injection on Gasoline Engine Performance
Because of the most common method of preparing the fuel-air mixture for gasolinefueled engines is port fuel injection (PFI). For reducing the wall-film entering the cylinder in liquid phase, the phenomena of wall-film entering the cylinder in liquid phase should be at minimum lever or be avoided. So the first thing for learning the wall-film is to detect the way of the wallfilm entering the cyl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Thermal Science
سال: 2015
ISSN: 0354-9836,2334-7163
DOI: 10.2298/tsci141121071m