UV Radiation of Cellulose Fibers and Acrylic Acid Modified Cellulose Fibers for Improved Stiffness in Paper
نویسندگان
چکیده
منابع مشابه
Cellulose fibers and nanofibrils for adhesive reinforcement
Introduction In wood industry, adhesive bonding is one of the key process steps. To ensure continuing technological progress in wood industry it is necessary to explore new possibilities of improvement in adhesive bonding. The potential routes for performance improvements suggested by a state of the art report issued by COST Action E13 Wood Adhesion and Glued Products (Dunky et al. 2002) focus ...
متن کاملMagnetic alignment and patterning of cellulose fibers.
The alignment and patterning of cellulose fibers under magnetic fields are reported. Static and rotating magnetic fields were used to align cellulose fibers with sizes ranging from millimeter to nanometer sizes. Cellulose fibers of the millimeter order, which were prepared for papermaking, and much smaller fibers with micrometer to nanometer sizes prepared by the acid hydrolysis of larger ones ...
متن کاملAll-Cellulose Composite Fibers Obtained by Electrospinning Dispersions of Cellulose Acetate and Cellulose Nanocrystals
All-cellulose composite fibers were produced by electrospinning dispersions containing cellulose acetate (CA) and cellulose nanocrystals (CNCs). Precursor polymer matrices were obtained after dispersion of CA with different degrees of substitution in a binary mixture of organic solvents. The obtained fibers of CA loaded with CNCs had typical widths in the nanoand micro-scale and presented a gla...
متن کاملGreen Barrier Materials from Cellulose Nano Fibers
In this study we prepared high grammage, robust, and structurally dense CNF (Cellulose nano fibrils) films with and without wet strength crosslinker KymeneTM (PAE, a polyamide-epichlorohydrin resin). Both selfcrosslink of PAE network and hetero crosslink between cellulose and PAE were formed at elevated temperature. Besides expected wet strength improvement, we also discovered unique stress-str...
متن کاملShort Cellulose Nanofibril/polyvinyl Alcohol Nanocomposite Fibers
Short cellulose nanofibrils (SCNF) were investigated as a reinforcement for polyvinyl alcohol (PVA) fibers. SCNF fibers were mechanically isolated from hard wood pulp after enzymatic pretreatment. Various levels of SCNF were added to PVA and gel-spun into continuous fibers. The molecular orientation of PVA was affected by a combination of wet drawing during gel spinning and post-hot-drawing at ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: BioResources
سال: 2015
ISSN: 1930-2126
DOI: 10.15376/biores.10.2.3056-3069