UV-LIGA Based Discrete Fabrication Process for Terahertz Corrugated Feed Horn
نویسندگان
چکیده
منابع مشابه
Advances in LIGA-based post-mold fabrication
The establishment of a process to allow planarization of deep x-ray lithography based microfabricated metal components via diamond lapping has enabled examination of three additional microfabrication issues. The areas of improvement that are discussed include materials, microassembly and packaging, and multilevel fabrication. New materials work has centered on magnetic materials including preci...
متن کاملDesign and Fabrication of a Narrow-bandwidth Micromechanical Ring Filter using a Novel Process in UV-LIGA Technology
This paper presents the design and a new low-cost process for fabrication of a second-order micromechanical filter using UV-LIGA technology. The micromechanical filter consists of two identical bulk-mode ring resonators, mechanically coupled by a flexural-mode beam. A new lumped modeling approach is presented for the bulk-mode ring resonators and filter. The validity of the analytical derivatio...
متن کاملUV-LIGA: From Development to Commercialization
A major breakthrough in UV-LIGA (Lithographie, Galvanoformung and Abformung) started with the use of epoxy-based EPON SU-8 photoresist in the mid-1990s. Using this photoresist has enabled the fabrication of tall and high aspect ratio structures without the use of a very expensive synchrotron source needed to expose the photoresist layer in X-ray LIGA. SU-8 photoresist appeared to be well-suited...
متن کاملLow Cost Single Mode Waveguide Fabrication Allowing Passive Fiber Coupling using LIGA and UV flood exposure
A process of UV-induced fabrication of single mode waveguides in a polymer microoptical bench has been realized that offers the unique feature of an inexpensive microstructure replication process for mass fabrication. Instead of using common mask techniques for the realization of the stripe waveguides, a “Self-masking” technique of the polymer by embossing a microoptical bench and a following U...
متن کاملPlanar plasmonic terahertz waveguides based on periodically corrugated metal films
We demonstrate that a one-dimensional periodically corrugated metal film can be used to create planar terahertz (THz) waveguides. The periodic corrugation is in the form of rectangular blind holes (i.e. holes that do not completely perforate the metal film) that are fabricated using a multilayer construction. The approach allows for the creation of structures in which the hole depth can be more...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia CIRP
سال: 2020
ISSN: 2212-8271
DOI: 10.1016/j.procir.2020.02.331