UV LED Curing of Hydrogel-Modified Textiles with High Anti-Fouling Resistance
نویسندگان
چکیده
منابع مشابه
Characterizing the Efficiency of UV LED Curing
This paper examines the effects of some key operating parameters of UV sources on the curing of various UV inks, coatings and adhesives. The effects of peak UV wavelength and peak intensity are quantitatively evaluated using FT-IR. The data are helpful in guiding both formulators, raw material suppliers and end users to better understand the impact of the UV sources, especially UV LED sources, ...
متن کاملUV-LED Curing Efficiency of Wood Coatings
Ultraviolet light emitting diodes (UV-LEDs) have attracted great interest in recent years. They can be used to polymerize coatings, such as those used for prefinished wood flooring. In this project, two lamps were compared for their suitability to be used on a wood flooring finishing line: a UV-microwave and a UV-LED lamp. Low heat emission was found for the UV-LED lamp compared to the UV-micro...
متن کاملUV - LED Overview Part II — Curing Systems
Te ch ni ca l P ap er UV-LED Overview Part II — Curing Systems By Jennifer Heathcote This article is the second installment in a three-part series designed to consolidate key principles and technical information regarding the science and engineering behind ultraviolet light-emitting diodes (UV-LEDs). If you have not yet read “Part I— Operation and Measurement” in the July/August 2010 issue, you...
متن کاملCuring efficiency of high-intensity light-emitting diode (LED) devices.
We evaluated the curing efficiency of 4 high-intensity light-emitting diode (LED) devices by assessing percentage of residual C=C (%RDB), surface microhardness (SM), depth of cure (DC), percentage of linear shrinkage-strain (%LS), and percentage of wall-to-wall contraction (%WWC). The light-curing units tested were a QTH light, the Elipar TriLight (3M/ESPE), and 4 LED devices - the Allegro (Den...
متن کاملColor Stability of a Microhybrid Resin Composite Polymerized with LED and QTH Light Curing Units
Introduction: Discoloration of resin composites is a common reason for replacement of these restorations. The aim of this study was to eva-luate the influence of different light curing de-vices on color stability of a microhybrid resin composite. Materials and Methods: 80 disc-shaped speci-mens (8 mm in diameter, 2-mm height) were fabricated from filtek Z250 resin composite. Specimens wer...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 2019
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.32.699