UV-LED Curing Efficiency of Wood Coatings

UV-LED Curing Efficiency of Wood Coatings

Ultraviolet light emitting diodes (UV-LEDs) have attracted great interest in recent years. They can be used to polymerize coatings, such as those used for prefinished wood flooring. In this project, two lamps were compared for their suitability to be used on a wood flooring finishing line: a UV-microwave and a UV-LED lamp. Low heat emission was found for the UV-LED lamp compared to the UV-micro...

Characterizing the Efficiency of UV LED Curing

This paper examines the effects of some key operating parameters of UV sources on the curing of various UV inks, coatings and adhesives. The effects of peak UV wavelength and peak intensity are quantitatively evaluated using FT-IR. The data are helpful in guiding both formulators, raw material suppliers and end users to better understand the impact of the UV sources, especially UV LED sources, ...

Synergistic Effect of Addition of Fillers on Properties of Interior Waterborne UV-Curing Wood Coatings

A waterborne ultraviolet (UV)-curing coating was prepared on the surface of wood materials with modification of talcum powder and calcium carbonate (CaCO3). When the waterborne UV-curing coatings on the surface of wood materials (WUVCW) was radiated for 1 min by UV (λ = 365 nm) and dried at 40 ◦C for 10 min, it showed good hardness, adhesion, and impact strength, with controlling the talcum con...

UV - LED Overview Part II — Curing Systems

Te ch ni ca l P ap er UV-LED Overview Part II — Curing Systems By Jennifer Heathcote This article is the second installment in a three-part series designed to consolidate key principles and technical information regarding the science and engineering behind ultraviolet light-emitting diodes (UV-LEDs). If you have not yet read “Part I— Operation and Measurement” in the July/August 2010 issue, you...

UV Curing of Pigmented High-Build Wood Coatings Based on Non-Air-Inhibited Unsaturated Polyesters