UV curing of acrylate monomers activated with resol resin.
نویسندگان
چکیده
منابع مشابه
Study the curing behavior and mechanical properties of Pigmented UV curable epoxy acrylate monomers
The formulations contained different acrylate monomer with different structure and functionalities and TiO2, were applied to obtain pigmented acrylic films by UV exposure. The conversion and mechanical characteristic were correlated. The results showed that there is a significant interaction between pigment, reactive diluents’ type and mechanical properties of coatings. It seems that cured film...
متن کاملHardness of composite resin polymerized with different light-curing units
Introduction: The degree of polymerization depends on the type of light-curing unit. The aim of this study was to compare the hardness of composite resin cured by LED and Halogen light curing units. Methods: In this experimental study, 20 cylindrical samples of Tetric Ceram composite were prepared. Half of them were cured with Ultralume 2 LED and the other half with Astralis 7 Halogen light ...
متن کاملA comparative evaluation of effect of modern-curing lights and curing modes on conventional and novel-resin monomers
Aim The aim of this study is to compare and to evaluate effect of curing light and curing modes on the nanohybrid composite resins with conventional Bis-GMA and novel tricyclodecane (TCD) monomers. Methodology Two nanohybrid composites, IPS empress direct and charisma diamond were used in this study. Light-emitting diode (LED)-curing unit and quartz-tungsten-halogen (QTH)-curing unit which we...
متن کاملStereolithography Cure Process Modeling Using Acrylate Resin
Yanyan Tang†, Clifford L. Henderson†, John Muzzy†, David W. Rosen* † School of Chemical & Biomolecular Engineering, 311 Ferst Drive, N.W., Georgia Institute of Technology, Atlanta, GA 30332-0100 *Corresponding author; School of Mechanical Engineering, 813 Ferst Drive, N.W., Georgia Institute of Technology, Atlanta, GA 30332-0405; Email: [email protected] Reviewed, accepted September 1, ...
متن کاملPhosphate Monomers on Bonding of Resin
The purpose of the present study was to evaluate the effects of four experimental primers on bond strength between a self-curing luting agent and silver-palladium-geld alloy. The experimental primers were in mixed solutions of a thiouracil primer (Metaltite) and a phosphate primer (Eprieord, PM, PE, or PP), which were designated as Meta]tite/Eprieord, Metaltite/PM, Metaltite/PE, and MetaltitelP...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 1989
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.2.231