UV Curable Oligomer for Opitcal Discs.
نویسندگان
چکیده
منابع مشابه
Preparation and Properties of UV curable urethane methacrylate oligomer
N,N-dihydroxyethyl methylacrylamide (DHEMAA), which is a methacrylate modified by diol, has been prepared by reaction of diethylanol amine with methyl methacrylate. UV curable urethane methacrylate oligomers have been synthesized by the reaction of a series of diol, triol, DHEMAA and HEMA with TDI or IPDI in two reaction orders. The first reaction style is the TDI or IPDI reacted with HEMA firs...
متن کاملUV-curable Encapsulants for LED
UV cured epoxy systems represent complementary technology to the established heat cured epoxy systems for coating, adhesion and encapsulation of electronic devices. The UV cured epoxy systems offer significant benefits in terms of fast cure and thus very short production cycle time; low stress and better colour due to room temperature cure; process wise no mix ratio problem or anhydride handlin...
متن کاملDesign and UV-curable behaviour of boron based reactive diluent for epoxy acrylate oligomer used for flame retardant wood coating
Difunctional boron-containing reactive flame retardant for UV-curable epoxy acrylate oligomer was synthesized from phenyl boronic acid and glycidyl methacrylate. The synthesized reactive diluent was utilized to formulate ultraviolet (UV)-curable wood coatings. The weight fractions of reactive diluent in coatings formulation was varied from 5 to 25 wt % with constant photoinitiator concentration...
متن کاملRheological Studies of UV - curable Materials
The challenge for studying fast changing systems with rheology such as UV initiated polymerization and crosslinking is multifold. These materials react within seconds and the moduli change over 2 to 3 decades. UV light must irradiate the sample homogeneously over a short time period and fast data acquisition is required to capture the modulus change during the reaction. An option for UV curing,...
متن کاملCan-Printing Process Uses UV-Curable Coating
Approximately 100 billion aluminum cans are produced annually, mainly for the beverage industry. Early technologies for decorating the cans often used solvent-based coatings containing solvents at concentrations of -70% to 75% by volume (Randall 1992). The solvent composition was typically a mixture of aliphatic hydrocarbons, aromatics, ethers, cellosolves, and acetates. Unfortunately, this met...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Kobunshi
سال: 1997
ISSN: 0454-1138,2185-9825
DOI: 10.1295/kobunshi.46.761