UV-crosslinked Polymeric Materials for Encapsulation of ZnO Nanowires in Piezoelectric Fingerprint Sensors
نویسندگان
چکیده
منابع مشابه
Vibration of Piezoelectric ZnO-SWCNT Nanowires
A hybrid nanowire (HNW) was constructed by coating a single-wall carbon nanotube (SWCNT) with piezoelectric zinc oxide (ZnO). The two components of the HNW interact with each other via the van der Waals (vdW) force. This paper aims to study the effect of the piezoelectricity in the ZnO layer and the inter-phase vdW interaction on the fundamental vibration of the HNWs. In doing this, a new model...
متن کاملDesign Concepts, Fabrication and Advanced Characterization Methods of Innovative Piezoelectric Sensors Based on ZnO Nanowires
Micro- and nano-scale materials and systems based on zinc oxide are expected to explode in their applications in the electronics and photonics, including nano-arrays of addressable optoelectronic devices and sensors, due to their outstanding properties, including semiconductivity and the presence of a direct bandgap, piezoelectricity, pyroelectricity and biocompatibility. Most applications are ...
متن کاملElectrospun ZnO Nanowires as Gas Sensors for Ethanol Detection
ZnO nanowires were produced using an electrospinning method and used in gas sensors for the detection of ethanol at 220 °C. This electrospinning technique allows the direct placement of ZnO nanowires during their synthesis to bridge the sensor electrodes. An excellent sensitivity of nearly 90% was obtained at a low ethanol concentration of 10 ppm, and the rest obtained at higher ethanol concent...
متن کاملAdvances in Lead-Free Piezoelectric Materials for Sensors and Actuators
Piezoelectrics have widespread use in today's sensor and actuator technologies. However, most commercially available piezoelectric materials, e.g., Pb [Zr(x)Ti(1-x)] O(3) (PZT), are comprised of more than 60 weight percent lead (Pb). Due to its harmful effects, there is a strong impetus to identify new lead-free replacement materials with comparable properties to those of PZT. This review highl...
متن کاملFabrication and characterization of ZnO nanowires based UV photodiodes
A heterojunction of n-type zinc oxide (ZnO) nanowires and p-type silicon has been successfully constructed to demonstrate ultraviolet (UV) photodiodes. The prototype device consists of naturally doped n-type ZnO nanowires grown on top of a (1 0 0) p-silicon substrate by the bottom-up growth process. The diameter of the nanowires is in the range of 70–120 nm, and the length is controlled by the ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2016
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2016.11.374