Utilization plastic waste using pyrolysis fixed bed
نویسندگان
چکیده
منابع مشابه
Pressurised pyrolysis of Miscanthus using a fixed bed reactor.
Miscanthus x giganteus was pyrolysed, in a fixed bed reactor in a constant flow of dinitrogen gas, at a rate of 13°C/min from ambient to 550°C, then held for 25 min at this temperature. The pressures employed ranged from atmospheric to 26 bar. The major compounds identified in the bio-oil were water, phenol, and phenol derivatives. The water contents impact on the usefulness of the bio-oil as a...
متن کاملNew energy value chain through pyrolysis of hospital plastic waste
In this paper, the evolution in thermochemical behaviours of hospital plastic wastes and changes in chemical composition and characteristics of pyrolysis liquid products have been investigated by using different fixed bed reactor scales. The main objective is to identify the critical technical parameters enabling thermochemical process adaptation in function of raw materials chemical structure,...
متن کاملThermal decomposition and gasification of biomass pyrolysis gases using a hot bed of waste derived pyrolysis char.
Chars produced from the pyrolysis of different waste materials have been investigated in terms of their use as a catalyst for the catalytic cracking of biomass pyrolysis gases during the two-stage pyrolysis-gasification of biomass. The chars were produced from the pyrolysis of waste tyres, refused derived fuel and biomass in the form of date stones. The results showed that the hydrocarbon tar y...
متن کاملThermochemical Conversion: Jatropha curcus in Fixed Bed Reactor Using Slow Pyrolysis
Thermochemical conversion of non-edible biomass offers an efficient and economically process to provide valuable fuels and prepare chemicals derived from biomass in the context of developing countries. Pyrolysis has advantages over other thermochemical conversion techniques because it can convert biomass directly into solid, liquid and gaseous products by thermal decomposition of biomass in the...
متن کاملA Novel Energy-Efficient Pyrolysis Process: Self-pyrolysis of Oil Shale Triggered by Topochemical Heat in a Horizontal Fixed Bed
This paper proposes a novel energy-efficient oil shale pyrolysis process triggered by a topochemical reaction that can be applied in horizontal oil shale formations. The process starts by feeding preheated air to oil shale to initiate a topochemical reaction and the onset of self-pyrolysis. As the temperature in the virgin oil shale increases (to 250-300°C), the hot air can be replaced by ambie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2019
ISSN: 1757-899X
DOI: 10.1088/1757-899x/539/1/012021