Utilization of palm fiber as papermaking materials: Microscopic structure and chemical pulping

Oil Palm Fibers as Papermaking Material: Potentials and Challenges

Ultrasound-Assisted Extraction of Arabinogalactan and Dihydroquercetin Simultaneously from Larix gmelinii as a Pretreatment for Pulping and Papermaking

An ultrasound-assisted extraction (UAE) method using ethanol was applied for extracting arabinogalactan (AG) and dihydroquercetin (DHQ) simultaneously from larch wood, as a pretreatment for pulping and papermaking. The extraction parameters were optimized by a Box-Behnken experimental design with the yields of AG and DHQ as the response values. Under optimum conditions (three extractions, each ...

Utilization of Soil Stabilization with Cement and Copper Slag as Subgrade Materials in Road Embankment Construction

In this study, unconfined compression tests have been conducted to investigate the impacts of copper slag on mechanical characteristics for stabilized cement and un-stabilized soil. Dozens of specimens were prepared at four percentages of cement (i.e. 0%, 2%, 4% and 6%) and five percentages of copper slag (i.e. 0%, 5%, 10%, 15% and 20%) by weight of dry soil. The samples compacted into a cylind...

Evaluation of the Chemical Composition of Different Non-Woody Plant Fibers Used for Pulp and Paper Manufacturing

The chemical composition of several non-woody plant fibers (bast fibers from flax, hemp, kenaf, jute; leaf fibers from sisal, abaca and curaua; and giant reed), which are used as raw materials for pulp and papermaking, has been evaluated. Particular attention was paid to the composition of the lipophilic compounds and the structure of the lignin polymer since they are important components of th...

Papermaking Fibers from Giant Reed (arundo Donax L.) by Advanced Ecologically Friendly Pulping and Bleaching Technologies

The anatomical structure and chemical composition of the stem-wall material of giant reed is considered from the viewpoint of raw material characterization for industrial fiber production. The effect of stem morphology (nodes and internodes) on pulping results and general pulp properties is discussed. The advantages of application of modern organic solvent based (organosolv) pulping technologie...