Utilization of nuclear fusion. Fusion power reactor.
نویسندگان
چکیده
منابع مشابه
UWFDM-1014 Nuclear Analysis for the Light Ion Fusion Power Reactor LIBRA-SP
A 1.2 m thick zone of blanket tubes is needed for the LIBRA-SP chamber wall to be a lifetime component. The roof should be located at 17 m from the target to be a lifetime component. The depth of the LiPb pool should be 0.6 m for the bottom plate to be a lifetime component. The required biological shield thickness is 2.5 m on the side and 2.6 m at the top. The overall TBR is 1.435 and the overa...
متن کاملUWFDM-962 Nuclear Analysis for the Inertially Confined Direct Drive Laser Fusion Power Reactor SIRIUS-P
The SIRIUS-P commercial reactor design produces 1000 MWe and is driven by 60 KrF laser beams. The chamber has an inner radius of 6.5 m and consists of a first wall fabricated from a carbon/carbon composite and a blanket made of SiC. The chamber is cooled by a flowing granular bed of solid ceramic material, TiO2 for the first wall and Li2O for the blanket. The overall tritium breeding ratio is 1...
متن کاملReliability and Availability Analysis of Fusion Power Plants
Major efforts are underway to develop fusion energy for use in electric power production in the furture. While fusion reactor concepts are being developed, appropriate attention must be given to problems relvant to the utility requirements which are likely to be encountered in the commercialization phase. In this paper the expected fusion plant availability is assessed in detail due to the impo...
متن کاملThe First Fusion Reactor: Iter
28 I n practical terms, the project’s goal is to construct and operate a tokamak experiment which can confine a deuterium-tritium plasma in which the α-particle heating dominates all other forms of plasma heating. Formally, the primary mission of the ITER project is to demonstrate sustainment of a DT plasma producing ~500 MW of fusion power for durations of 300 500 s with a ratio of fusion outp...
متن کاملConcept of Multi-function Fusion Reactor
To really use the fusion energy and make the fusion energy as a main energy in the world could need more than 50 years. The construction of ITER starts the real course to realize the peaceful use of the fusion energy. It means the technologies developed in the world are feasible to built fusion facilities or reactors with fusion core plasmas. Based on the technologies nowadays, a concept of mul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Fuel Society of Japan
سال: 1988
ISSN: 0369-3775,2185-226X
DOI: 10.3775/jie.67.9_747