Using vibration cutting for finish turning hard materials
نویسندگان
چکیده
منابع مشابه
Thermal modeling for white layer predictions in finish hard turning
Part thermal damage is a process limitation in finish hard turning and understanding process parameter effects, especially, tool wear, on cutting temperatures is fundamental for process modeling and optimization. This study develops an analytical model for cutting temperature predictions, in particular, at the machined-surfaces, in finish hard turning by either a new or worn tool. A mechanistic...
متن کاملCutting Disturbances in Hard Turning Process
Assumption of cutting disturbances in hard turning process (caused by variations in depth of cutting, high passive force Fp or small tool nose radius) could be confirmed with several indicators. These indicators can be monitored during turning process(forces, vibrations, sound, etc.) or after process has been finished (roughness, temperature, wear, etc). Variation of depth of cutting as well as...
متن کاملEstimation of cutting forces and surface roughness for hard turning using neural networks
Metal cutting mechanics is quite complicated and it is very difficult to develop a comprehensive model which involves all cutting parameters affecting machining variables. In this study, machining variables such as cutting forces and surface roughness are measured during turning at different cutting parameters such as approaching angle, speed, feed and depth of cut. The data obtained by experim...
متن کاملvibration cutting and elliptical ultrasonic vibration assisted turning of in738 work-pieces
vibration cutting (vc), elliptical vibration cutting (evc) and ordinary cutting (oc) of in738 work-pieces have been experimentally investigated in the present research. the experiments were carried out by using single crystal diamond tool and ultra-precision cnc lathe. vibration frequency is 36.16khz and the amplitude is . the influence of various cutting parameters including cutting speed, fee...
متن کاملInvestigating Flank Wear and Cutting Force on Hard Steels by CBN Cutting Tool by Turning
In this research work a series of tests were conducted in order to determine flank wear and cutting force FY on hard AISI 440 C martensitic stainless steel and SCM 440 alloy steels. The operating parameters are cutting speed, feed rate and a constant depth of cut to investigate the flank wear and cutting force. No cutting fluid was used during the turning process. The cutting tool used was CBN ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2019
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1399/4/044013