Using Micro-Molding and Stamping to Fabricate Conductive Polydimethylsiloxane-Based Flexible High-Sensitivity Strain Gauges
نویسندگان
چکیده
منابع مشابه
Using Micro-Molding and Stamping to Fabricate Conductive Polydimethylsiloxane-Based Flexible High-Sensitivity Strain Gauges
In this study, polydimethylsiloxane (PDMS) and conductive carbon nanoparticles were combined to fabricate a conductive elastomer PDMS (CPDMS). A high sensitive and flexible CPDMS strain sensor is fabricated by using stamping-process based micro patterning. Compared with conventional sensors, flexible strain sensors are more suitable for medical applications but are usually fabricated by photoli...
متن کاملMolding of deep polydimethylsiloxane microstructures for microfluidics and biological applications.
Here we demonstrate the microfabrication of deep (> 25 microns) polymeric microstructures created by replica-molding polydimethylsiloxane (PDMS) from microfabricated Si substrates. The use of PDMS structures in microfluidics and biological applications is discussed. We investigated the feasibility of two methods for the microfabrication of the Si molds: deep plasma etch of silicon-on-insulator ...
متن کاملHigh Strain and Biocompatible Screen Printed Nanocomposite Based Conductive Pdms Strain Sensors
Strain sensors capable of operating in high strain conditions remain a technical challenge. In particular, biocompatible strain sensor technology is needed that satisfies the following requirements: (1) construction from low modulus materials that approach values of soft biological tissues and (2) high strain operation (≥ 20%). We present a screen printed, nanocomposite-based conductive polydim...
متن کاملNetwork of Flexible Capacitive Strain Gauges for Reconstruction of Surface Strain
Monitoring of surface strain on mesosurfaces is a difficult task, often impeded by the lack of scalability of conventional sensing solutions. A solution is to deploy large networks of flexible strain gauges, a type of large area electronics. The authors have recently proposed a soft elastomeric capacitor (SEC) as an economical skin-type solution for large-scale deployment onto mesosurfaces. The...
متن کاملA Rapid Prototyping Microfabrication Method Using High-temperature Castable Material for High-throughput Micro-injectiong Molding
In this research, a new scheme of rapid prototyping using high-temperature castable materials for microfabrication of polymer lab-on-a-chip, which is used for micro-injection molding is proposed and characterized with extension of the replaceable mold disk technology. Showing perfect master mold creation of ultra-high density channel with aspect ratio of ~0.7, the proposed process is well fitte...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2018
ISSN: 1424-8220
DOI: 10.3390/s18020618