Using high-pressure torsion to fabricate an Al–Ti hybrid system with exceptional mechanical properties
نویسندگان
چکیده
A novel hybrid material was fabricated from the Al–Ti system using high-pressure torsion up to 50 turns. Microstructural observations revealed intermetallic phases and mixing zones enriched in Ti, consisting of grains ~20 nm within an Al matrix. Microhardness measurements gave values higher than HPT-processed bulk aluminium alloy.
منابع مشابه
Micro-Mechanical Response of an Al-Mg Hybrid System Synthesized by High-Pressure Torsion
This paper summarizes recent efforts to evaluate the potential for the formation of a metal matrix nanocomposite (MMNC) by processing two commercial bulk metals of aluminum and magnesium alloy through high-pressure torsion (HPT) at room temperature. After significant evolutions in microstructures, successful fabrication of an Al-Mg hybrid system was demonstrated by observing unique microstructu...
متن کاملMicrostructures and Mechanical Properties of Pure V and Mo Processed by High-Pressure Torsion
Two body centered cubic (bcc) metals, V and Mo, were processed by high pressure torsion (HPT) at ambient temperature. Hardness variation as well as microstructural evolution was examined with strain under a pressure of 2 to 6GPa. It was shown that the hardness increases with straining and saturates to a constant level with the grain size of 330–400 nm in V irrespective of the applied pressures....
متن کاملNumerical Analysis of Severe Plastic Deformation by High Pressure Torsion
High-pressure torsion (HPT) is a metal processing method in which the sample is subjected to a very high plastic shear deformation. This process can produce exceptional levels of grain refinement, and provides a corresponding improvement in mechanical properties. To investigate the stress and strain distribution due to HPT process finite element simulation were conducted to investigate effectiv...
متن کاملUsing high-pressure torsion to process an aluminum–magnesium nanocomposite through diffusion bonding
Disks of commercial Al-1050 and ZK60A alloys were stacked together and then processed by conventional high-pressure torsion (HPT) through 1 and 5 turns at room temperature to investigate the synthesis of an Al–Mg alloy system. Measurements of microhardness and observations of the microstructures and local compositions after processing through 5 turns revealed the formation of an ultrafine multi...
متن کاملDirect Covalent Assembly to Fabricate Microcapsules with Ultrathin Walls and High Mechanical Strength
Microcapsules with ultrathin wall and high stability are of both scientific and technological importance. They can provide ideal models for investigations of permeability, elasticity and responsivity on a nanometer scale, and be used as microcarriers and micro-reactors in a confined space. Among the established techniques such as nozzle reactor process, emulsion/phase separation, sol-gel proces...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering A-structural Materials Properties Microstructure and Processing
سال: 2021
ISSN: ['0921-5093', '1873-4936']
DOI: https://doi.org/10.1016/j.msea.2020.140114