Using Cu–Zn–Sn–O Precursor to Optimize CZTSSe Thin Films Fabricated by Se Doping With CZTS Thin Films
نویسندگان
چکیده
منابع مشابه
Deposition and characterization of SnO2:Sb thin films fabricated by the spray pyrolysis method
In this study, thin films of transparent semiconductor tin oxide doped with antimony impurities on the glass substrates with different concentrations of antimony that have been prepared using spray pyrolysis method. The effects of different concentration of antimony on the structural, optical, and electrical properties of the thin films were investigated. Prepared layers were characterized by X...
متن کاملPhotoinduced doping of thin amorphous WO, films
During cxposurc of thin amorphous WO, films to UV light, both the optical absorptivity and thc electrical conductibity increase, Using optically excited surface plasmons. we were ablc to mcnsure even subtle changes of the absorpt~vity of 10 ntn thtck films simuFtaneously with their electrical resistivity a t varivus temperatuscs. Our measurements show that the temperature dependence and thc dcp...
متن کاملNitrogen doping of amorphous carbon thin films
Nitrogenated and hydrogenated amorphous carbon (a-C:H:N) films have been deposited by a plasma beam source using a gas mixture of C2H2 , Ar and N2 . The Ar/C2H2 ratio is kept constant at a ratio of 3, with the nitrogen flow allowed to vary. Nonnitrogenated films, with Ar/C2H2 ratios of 3 and 6 were also deposited and analyzed before attempting to identify the modifications to the microstructura...
متن کاملHigh coercivity SmFeAlC thin films fabricated by multilayer sputtering
Multilayer sputtering of SmFe/C(Al) plus appropriate thermal processing has been used to fabricate SmFeC thin films with A1 substitution for Fe. It was found that the SmFeAlC thin films exhibited exceptionally high Coercivities. A coercivity of 28 kOe was realized for the thin film with structure of Ta( l000~) / lSmFe(40~~/ G(Al)(5,&)]~50/Ta(200@ with subsequent annealing at 650°C.
متن کاملEffect of Annealing on Physical Properties of Cu2ZnSnS4 (CZTS) Thin Films for Solar Cell Applications
Cu2ZnSnS4 (CZTS) thin films were prepared by directly sputteringCu (In,Ga)Se2 quaternary target consisting of (Cu: 25%, Zn: 12.5%, Sn; 12.5%and S: 50%). The composition and structure of CZTS layers have beeninvestigated after annealing at 200 0C, 350 0C and 500 0C under vacuum. Theresults show that recrystallization of the CZTS thin film occurs and increasingthe grain size with a preferred orie...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Frontiers in Chemistry
سال: 2021
ISSN: 2296-2646
DOI: 10.3389/fchem.2021.621549