Use of Electrophoretic Impregnation and Vacuum Bagging to Impregnate SiC Powder into SiC Fiber Preforms
نویسندگان
چکیده
منابع مشابه
Application of Electrophoretic Deposition for Interfacial Control of High-Performance SiC Fiber-Reinforced SiC Matrix (SiCf/SiC) Composites
This chapter reviews the novel fabrication process of continuous SiCf /SiC composites based on electrophoretic deposition (EPD). EPD process is very effective for achieving relatively homogeneous carbon coating with the thickness of several tens to hundreds nanometers on SiC fibers. Carbon interface with the thickness of at least 100 nm formed by EPD acts effectively for inducing interfacial de...
متن کاملEFFECT OF FIBER ARCHITECTURE ON MECHANICAL BEHAVIOR OF SiC(f)/SiC COMPOSITES
We evaluated mechanical properties (first matrix cracking stress, strength, and work-of-fracture) of Nicalon-fiber-reinforced silicon carbide matrix composites with three different fiber lay-up sequences (0"/20"/60", O0/4Oo/6O0, and 0"/45") at various temperatures from room to 1300°C. Up to 1200"C, ultimate strength and work-of-fracture for the 0"/40"/60" and 0"/45" composites increased, but th...
متن کامل3C-SiC Heteroepitaxy on Hexagonal SiC Substrates
The growth of 3C-SiC on hexagonal polytype is addressed and a brief review is given for various growth techniques. The Chemical Vapor Deposition is shown as a suitable technique to grow single domain 3C epilayers on 4H-SiC substrate and a 12.5 μm thick layer is demonstrated; even thicker layers have been obtained. Various characterization techniques including optical microscopy, X-ray technique...
متن کاملComparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites
In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMC...
متن کاملMethane combustion over Pd/ZrO2/SiC, Pd/CeO2/SiC, and Pd/Zr0.5Ce0.5O2/SiC catalysts
The performances of different promoters (CeO2, ZrO2 and Ce0.5Zr0.5O2 solid solution) modified Pd/SiC catalysts for methane combustion are studied. XRD and XPS results showed that Zr 4+ could be incorporated into the CeO2 lattice to form Zr0.5Ce0.5O2 solid solution. The catalytic activities of Pd/CeO2/SiC and Pd/ZrO2/SiC are lower than that of Pd/Zr0.5Ce0.5O2/SiC. The Pd/Zr0.5Ce0.5O2/SiC catalys...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Applied Ceramic Technology
سال: 2013
ISSN: 1546-542X
DOI: 10.1111/ijac.12143