Usage of zinc-silicate coatings in friction connections
نویسندگان
چکیده
منابع مشابه
Acrylic resin derivatives as modifier for potassium silicate binder in zinc-rich coatings: electrochemical studies
Water based inorganic alkali silicate binder of zinc rich primer was modified by adding acrylic resin derivatives. Several series of primer coatings were formulated by adding 5, 10 and 15 wt of acrylic and acrylic/styrene copolymer to potassium silicate binder and used as binder in zinc rich coatings. The formulated primers were applied on low carbon steel plates and the corrosion protection pr...
متن کاملOrganically modified silicate coatings for optical fibers
Three kinds of UV-curable organically modified silicates have been prepared to be used as protective coatings for optical fibers. The synthesis involves the reaction of the thiol group of 3-mercaptopropyltrimethoxysilane with a C =C bond in one of the acrylic groups of three commercially available aliphatic triacrylates. The methoxysilyl groups of the synthesized diacrylate methoxysilanes were ...
متن کاملIn vitro behavior of silicate glass coatings on Ti6A14V.
The in vitro response in simulated body fluid (SBF) of silicate glass coatings on Ti6A14V was evaluated. Glasses belonging to the SiO2-CaO-MgO-Na2O-K2O-P2O5 system were used to prepare 50-70 m thick coatings on Ti6Al4V, employing a simple enameling technique. Glasses with silica content higher than 55 wt% can be used to prepare coatings that do not crack or delaminate and exhibit good adhesion ...
متن کاملLow Friction CrNMPP/TiNDCMS Multilayer Coatings
Transition metal nitrides like CrN and TiN are widely used in automotive applications due to their high hardness and wear resistance. Recently, we showed that a multilayer architecture of CrN and TiN, deposited using the hybrid-high power impulse magnetron sputtering (HIPIMS) and direct current magnetron sputtering (DCMS)-HIPIMS/DCMS deposition technique, results in coatings which indicate not ...
متن کاملStresses in Ytterbium Silicate Multilayer Environmental Barrier Coatings
The internal stresses of plasma-sprayed multilayer ytterbium disilicate environmental barrier coatings were measured using microfocused high-energy X-rays in a transmission geometry. Stresses were measured for as-sprayed and ex-situ heat-treated ytterbium disilicate topcoats at room temperature and during in-situ heating and cooling experiments. In-situ loading experiments were also performed o...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Istrazivanja i projektovanja za privredu
سال: 2016
ISSN: 1451-4117
DOI: 10.5937/jaes14-10450