USABILITY OF PCF-ASH AS LIGHTWEIGHT AGGREGATE IN FOAM CONCRETE

Prediction of Lightweight Aggregate Concrete Compressive Strength

Nowadays, the better performance of lightweight structures during earthquake has resulted in using lightweight concrete more than ever. However, determining the compressive strength of concrete used in these structures during their service through a none-destructive test is a popular and useful method.  One of the main methods of non-destructive testing in the assessment of compressive strength...

Properties of Green Lightweight Aggregate Concrete

With increasing concern over the excessive exploitation of natural aggregates, synthetic lightweight aggregate produced from environmental waste is a viable new source of structural aggregate material. The uses of structural grade lightweight concrete reduce considerably the self-load of a structure and permit larger precast units to be handled. In this paper, the mechanical properties of a str...

Beneficial Reuse of Locally-available Waste Materials as Lightweight Aggregate in Lightweight Concrete

Effect of Cured Time on Creep of Lightweight Aggregate Concrete

Creep and shrinkage are such properties that will occur in concrete when they are under load and exposed to surrounding. Since this property will cause deformation which may decrease the design strength of the concrete, it is necessary to do have more knowledge on this phenomenon. So, we will study the effect of creep on 7 and 14 days of cured time of specimens which sealed or unsealed will be ...

Fly Ash-based Geopolymer Lightweight Concrete Using Foaming Agent

In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium silicate and NaOH), and foam was added to the geopolymeric mixture to produce lightweight concrete. The NaOH solution was prepared by dilute NaOH pellets with distilled water. The ...