Uranium Adsorption from Aqueous Solution Using Sodium Bentonite Activated Clay
نویسندگان
چکیده
منابع مشابه
Adsorption of Malachite Green from Aqueous Solution using Activated Ntezi Clay: Optimization, Isotherm and Kinetic Studies
The adsorption of malachite green from aqueous solution using a local low cost adsorbent, acid activated Ntezi clay, was investigated. The low cost adsorbent was activated with different concentrations of sulphuric acid and the physicochemical properties of the adsorbent were determined and the structural properties were analyzed using XRF and XRD. The adsorption process was studied as a functi...
متن کاملBiosorption of Uranium (VI) from Aqueous Solution by Pretreated Aspergillus niger Using Sodium Hydroxide
The removal of uranium and any other heavy metals from wastewater might be achieved via several chemical or physical treatment techniques. Biosorption process has been considered as a potential alternative way to remove contaminants from industrial effluents. Moreover the surface of biosorbent was characterized by SEM. The biosorption characteristics of uranium (VI) on pretreated A...
متن کاملAdsorption of 4-chlorophenol from aqueous solution using activated carbon synthesized from aloe vera green wastes
In this study, activated carbon synthesized from Aloe vera green wastes was used as a sorbent to remove 4-chlorophenol (4-CP) from aqueous solutions. The influence of contact time (0-100 minutes), pH (2-8), adsorbent dosage (1-9 g/l), and initial 4-CP concentration (10-60 mg/l) in batch system was investigated on the sorption. The sorbent was specified using scanning electron microscopy (SEM). ...
متن کاملRemoval of chromium (VI) from aqueous solution by adsorption using cousinia eryngioides boiss and activated carbon
Adsorption capacity of Cr (VI) onto cousinia eryngioides boiss, activated carbon was investigated in a batch system by considering the effects of various parameters like contact time, initial concentration, pH, temperature, agitation speed, absorbent dose and particle size. Cr (VI) removal is pH dependent and found to be maximum at pH 2.0. The amounts of Cr (VI) adsorbed increased with increase...
متن کاملAdsorption of nitrate from aqueous solution using activated carbon-supported Fe0, Fe2 (SO4)3, and FeSO4
In this laboratory scale study, impregnated almond shell activated carbon was used as adsorbent to investigate its feasibility for nitrate adsorption from aqueous medium. The effects of activated carbon dosage and contact time have been examined in batch experiments. Experimental data show that impregnated activated carbons by Fe0, Fe2 (SO4)3, and FeSO4 were more effective than virgin almond ac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Chemical Engineering & Process Technology
سال: 2017
ISSN: 2157-7048
DOI: 10.4172/2157-7048.1000349