Upgrading Recycled Polypropylene from Textile Wastes in Wood Plastic Composites with Short Hemp Fiber
نویسندگان
چکیده
منابع مشابه
Fiber reinforced plastic composites using recycled materials
This work investigates the feasibility of using recycled high density polyethylene (rHDPE), recycled polypropylene (rPP) and old newsprint fiber (ONP) to manufacture fiber reinforced composites. The boards were made through air-forming and hot press. The effects of the fiber loading and coupling agent content on tensile, flexural, internal bond properties and water absorption and thickness swel...
متن کاملDurability of wood plastic composites manufactured from recycled plastic
The influence of accelerated weathering, xenon-arc light and freeze-thaw cycling on wood plastic composites extruded from a recycled plastic was studied. The results showed that, in general, weathering had a stronger impact on samples made from plastic waste compared to a sample made from virgin material. After weathering, the mechanical properties, tensile and flexural, were reduced by 2-30%, ...
متن کاملStatistical Behaviour of Hemp and Sisal Fiber Reinforced Polypropylene Composites
The use of vegetal fibres in thermoplastic matrix is increasing mainly because of their opportunity to recycle the structures. An another advantage is to provide materials for developing countries were these fibers are abundant. Nowadays, a lot of studies are more focused on the fibers to understand their microstructure and to establish their mechanical properties [1,2]. One of the main results...
متن کاملfiber reinforced plastic composites using recycled materials
this work investigates the feasibility of using recycled high density polyethylene (rhdpe), recycled polypropylene (rpp) and old newsprint fiber (onp) to manufacture fiber reinforced composites. the boards were made through air-forming and hot press. the effects of the fiber loading and coupling agent content on tensile, flexural, internal bond properties and water absorption and thickness swel...
متن کاملFlat-pressed wood plastic composites from sawdust and recycled polyethylene terephthalate (PET): physical and mechanical properties
This study deals with the fabrication of composite matrix from saw dust (SD) and recycled polyethylene terephthalate (PET) at different ratio (w/w) by flat-pressed method. The wood plastic composites (WPCs) were made with a thickness of 6 mm after mixing the saw dust and PET in a rotary type blender followed by flat press process. Physical i.e., density, moisture content (MC), water absorption ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymers
سال: 2021
ISSN: 2073-4360
DOI: 10.3390/polym13081248