Unveiling precipitation behavior in Mg-Y based alloys

Precipitation Hardening of Al–Si–Mg Alloys

Precipitation of bcc nanocrystals in bulk Mg–Cu–Y amorphous alloys

Coexistent amorphous and nanoscale bcc-Mg7Li3 phases were found in slowly quenched alloys of the Mg65–xLixCu25Y10 system containing 3 to 15 at. % Li. The crystallization behavior of these alloys has been studied. The grain size of the nanocrystalline bcc phase which is formed ranges from 2 to 20 nm. The volume fraction of nanocrystalline phases as well as the grain size of the nanocrystals incr...

Effect of copper on precipitation and baking hardening behavior of Al−Mg−Si alloys

The effects of copper on the ageing precipitation behavior of as-quenched and pre-aged AA6016 aluminum alloy were studied by differential scanning calorimetry (DSC), Vickers hardness measurement and transmission electronic microscopy (TEM). The results indicate that the addition of copper facilitates the growth of clusters (GP I) to the critical size during pre-ageing. Therefore, the addition o...

Modulated Structures, Nanocrystals and Quasicrystals in Mg-Zn-Y Alloys

The formation of the icosahedral phase, BCC (Body centred cubic) phase and nanocrystals are seen in the as-cast alloy with nominal composition of Mg4Zn94Y2. FCC (face centred cubic) phase and modulated structures are formed in the alloys with higher Y content (10% and 25% Y respectively). These phases are analysed keeping in view their relation to the quasicrystals of the Mg-Zn-Y system.

Precipitates and intermetallic phases in precipitation hardening Al–Cu–Mg–(Li) based alloys

The present study contains a critical review of work on the formation of precipitates and intermetallic phases in dilute precipitation hardening Al–Cu–Mg based alloys with and without Li additions. Although many suggestions for the existence of pre-precipitates in Al–Cu–Mg alloys with a Cu/Mg atomic ratio close to 1 have been made, a critical review reveals that evidence exists for only two tru...