Unraveling the mysterious failure of Cu/SAPO-34 selective catalytic reduction catalysts
نویسندگان
چکیده
منابع مشابه
Mercury oxidation over selective catalytic reduction ( SCR ) catalysts
The vanadium-based SCR catalyst used for NOx-control promotes the oxidation of elemental mercury Hg to Hg in flue gases from coal-fired power plants. Hg is water soluble and can effectively be captured in a wet scrubber. This means that the combination of an SCR with a wet FGD can offer an effective control option for mercury. Laboratory experiments have been carried out to elucidate and quanti...
متن کاملThe Selective Catalytic Reduction of NOx with NH3 over Titania Supported Rhenium Oxide Catalysts
Titania supported vanadium oxide catalysts have been demonstrated to be very efficient catalysts for the selective reduction of NOx with NH3 and have found widespread industrial application for the control of NOx emissions from stationary sources (1). Characterization studies have demonstrated that supported vanadium oxide catalysts consist of a two-dimensional metal oxide overlayer on the oxid...
متن کاملCobalt-based alumina pillared zirconium phosphate catalysts for the selective catalytic reduction of NO by propane.
A series of cobalt containing alumina pillared zirconium phosphate materials have been prepared by ion exchange or by impregnation, and fully characterised. The catalytic behaviour of these materials in the selective catalytic reduction of NO by propane, in excess of oxygen, at temperatures ranging between 350 and 550 degrees C, has been also evaluated. A maximum NO conversion close to 14% is o...
متن کاملThe selective catalytic reduction of NO over Ce0.3TiOx-supported metal oxide catalysts.
A Ce0.3TiOx oxide carrier was synthesized via a sol-gel process, and Ce0.3TiOx supported metal (M=Cd, Mn, Fe, W, Mo) oxide catalysts were prepared by the method of incipient-wetness impregnation. The catalysts were characterized by means of X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) analysis, scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transfor...
متن کاملPreparation of Mn-Based Selective Catalytic Reduction Catalysts by Three Methods and Optimization of Process Conditions
Mn-based catalysts enable high NO x conversion in the selective catalytic reduction of NO x with NH3. Three catalyst-production methods, namely, co-precipitation, impregnation, and sol-gel, were used in this study to determine the optimum method and parameters. The maximum catalytic activity was found for the catalyst prepared by sol-gel with a 0.5 Mn/Ti ratio. The denitrification efficiency us...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Nature Communications
سال: 2019
ISSN: 2041-1723
DOI: 10.1038/s41467-019-09021-3