UNIDIRECTIONAL AND BIDIRECTIONAL LOADING TESTS ON REINFORCED CONCRETE BEAM-COLUMN JOINTS

Full Scale Reinforced Concrete Beam-Column Joints Strengthened with Steel Reinforced Polymer Systems

This paper presents the results of an experimental campaign performed at the Laboratory of Materials and Structural Testing of the University of Salerno (Italy) in order to investigate the seismic performance of reinforced concrete (RC) beam-column joints strengthened with steel reinforced polymer (SRP) systems. With the aim to represent typical façade frames’ beam-column subassemblies found in...

Seismic Behavior of Beam Column Joints in Reinforced Concrete Moment Resisting Frames

AN OPTIMIZATION PROCEDURE FOR CONCRETE BEAM-COLUMN JOINTS STRENGTHENED WITH FRP

This paper illustrates an optimization procedure of concrete beam-column joints subjected to shear that are strengthened with fiber reinforced polymer (FRP). For this aim, five different values have been considered for length, width and thickness of the FRP sheets which created 125 different models to strengthen of concrete beam-column joints. However, by using response surface methodology (RSM...

experimental and numerical investigation on frame structure composed of steel reinforced concrete beam and angle-steel concrete column under dynamic loading

this paper describes experimental and numerical investigations on two specimens of frames composed of steel reinforced concrete beam and angle-steel concrete column under horizontal low cyclic loading. based on the test results, the relationship curves of the horizontal load-displacement and the failure modes are acquired. meanwhile the hysteretic behaviors, skeleton curves, stiffness degradati...

Performance-based Optimization of Strut-and-tie Models in Reinforced Concrete Beam-column Connections

This paper presents the performance-based optimization of strut-and-tie models in reinforced concrete beam-column connections. The performance-based optimization (PBO) technique is employed to investigate optimal strut-and-tie models in reinforced concrete beam-column connections. Developing strut-and-tie models in reinforced concrete beam-column connections is treated as a topology optimizatio...