Uniaxial ratcheting behavior of hygrothermal aging anisotropic conductive adhesive film
نویسندگان
چکیده
منابع مشابه
A Shear Strength Degradation Model for Anisotropic Conductive Adhesive Joints Under Hygrothermal Conditions
Hygrothermal environments can degrade anisotropic conductive adhesive (ACA) joints by weakening the shear strength of adhesive interface. In this paper, the shear strength degradation model of ACA joints under hygrothermal conditions was formulated through experimental testing and theoretical modeling. The shear strength degradation data were obtained from different hygrothermal aging tests and...
متن کاملEffect of drop impact energy on contact resistance of anisotropic conductive adhesive film joints
The contact resistances investigated in this study of anisotropic conductive adhesive film joints using Au/Ni bumps and flexible substrates are found to be increased by the drop impact energy and also by the combined effect of heat/humidity and the impact energy. The samples humidified at 85 °C/85% RH for 384 h, on which impact energy of 50 J was induced, exhibit the most severe results. The co...
متن کاملContact Resistance of Anisotropic Conductive Adhesive Film Based Flip-chip on Glass Packages
In a flip-chip-on-glass (FCOG) assembly, anisotropic conductive film (ACF) is used as the adhesive to bind the desired interconnection between the flip chip and glass substrate. However, it remains a challenge to develop the ACF bonded flip chip packages with low contact resistance. Considerable research has been conducted recently to investigate the effect of different parameters on the contac...
متن کاملStudy of anisotropic conductive adhesive joint behavior under 3-point bending
Flip chip interconnections using anisotropic conductive film (ACF) are now a very attractive technique for electronic packaging assembly. Although ACF is environmentally friendly, many factors may influence the reliability of the final ACF joint. External mechanical loading is one of these factors. Finite element analysis (FEA) was carried out to understand the effect of mechanical loading on t...
متن کاملReliability of Anisotropic Conductive Adhesive Joints in Electronic Packaging Applications
New interconnection materials are always necessary as a result of evolving packaging technologies and increasing performance and environmental demands on electronic systems. In particular, anisotropic conductive adhesives (ACAs) have gained popularity as a potential replacement for solder interconnects. Despite numerous benefits, ACA-type packages pose several reliability problems. During the l...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Testing
سال: 2013
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2013.09.011