Understanding Ultra-Thin Film Resist and Underlayer Performance through Physical Characterization
نویسندگان
چکیده
منابع مشابه
Ultra-thin Graphitic Film: Synthesis and Physical Properties
A scalable technique of chemical vapor deposition (CVD) growth of ultra-thin graphitic film is proposed. Ultra-thin graphitic films grown by a one-step CVD process on catalytic copper substrate have higher crystallinity than pyrolytic carbon grown on a non-catalytic surface and appear to be more robust than a graphene monolayer. The obtained graphitic material, not thicker than 8 nm, survives d...
متن کاملModification of Thin Film Composite Nanofiltration Membrane using Silver Nanoparticles: Preparation, Characterization and Antibacterial Performance
This paper reports on preparation of polyamide membrane with addition of silver nanoparticles (AgNPs). AgNPs act as antibacterial agents that are less susceptible to membrane’s biofouling by interfacial polymerization (IP) method. AgNPs was synthesized via green route which has been reported previously. Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR), Field emiss...
متن کاملMagnetic Thin Film Characterization
An improvement on the fabrication of magnetic thin films is currently on a level of intense research as these films are of great interest in the device industry. Some of these thin films posses high permeability and ferromagnetic resonance (FMR) frequency in the GHz range which are suitable for electromagnetic use. Methods for fabricating these films include sputtering, pulse laser deposition (...
متن کاملIntegrated ultra-thin-film gas sensors
The fabrication and performance of an ultra-thin-film integrated gas sensor for detecting impurities in semiconductor process gases are described. Detector responses are based on gas-induced resistance changes in an ultra-thin Ti-P film mounted on a thin dielectric window supported by a silicon rim. The window temperature can be shifted several hundred degrees Celsius in less than one second. G...
متن کاملBarium and Strontium Ferrite Perpendicular Thin Film Media with a Sendust Soft Magnetic Underlayer
The possibility of using sendust (FeAlSi) as the soft magnetic underlayer for hexagonal barium ferrite (BaM) and strontium ferrite (SrM) was studied. Sendust films were found to retain their soft magnetic properties with a rapid thermal anneal (RTA) at 800 C for 60 s, which is necessary to crystallize the as-deposited amorphous BaM and SrM films. Several film structures with sendust films as th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Photopolymer Science and Technology
سال: 2010
ISSN: 0914-9244,1349-6336
DOI: 10.2494/photopolymer.23.699