Understanding fuel anti-knock performances in modern SI engines using fundamental HCCI experiments
نویسندگان
چکیده
منابع مشابه
Kinetic modelling of a surrogate diesel fuel applied to 3D auto-ignition in HCCI engines
ing a methyl side hydrogen atom; the ipso-additions (addition of an atom to an aromatic ring leading to the abstraction of another atom or of a radical) of H-atoms producing naphthalene and methyl radicals; the ipso-additions of O-atoms forming methylnaphtoxy radicals and H-atoms; the additions of OH radicals leading to methylnaphthols and H-atoms; the metatheses by H-abstraction. As in the cas...
متن کاملA Study of the Physics and Chemistry of Knock in Modern SI Engines and Their Relationship to the Octane Tests
Avoiding knock is the major design constraint for spark ignition engines because of the unacceptable noise and engine damage associated with it. Hence, the Research and Motor Octane Number (RON and MON) tests were established in 1928 such that a fuel with a higher RON and MON is less likely to knock than a fuel with a lower value. However, engine and fuel technology has evolved since 1928, and ...
متن کاملModel-based Feedback Control for an Automated Transfer out of Si Operation during Si to Hcci Transitions in Gasoline Engines
This paper takes a first step towards model-based feedback control for the transition between spark ignition (SI) and homogeneous charge compression ignition (HCCI) combustion modes by approaching the transfer out of SI operation during the SI into HCCI transition in a closed-loop control framework. The combustion mode switch is taken to be directly from SI to HCCI without an intermediate combu...
متن کاملObserver Based Feedforward Air-fuel Control of Turbocharged Si-engines
Air-fuel control on turbocharged (TC) SI-engines require precise prediction of the cylinder air-charge (CAC). Using an observer it is possible to both estimate the necessary system states and to provide a framework to design the necessary CAC feedforward controller. Here a mean value engine model of a TC SI-engine is used to develop an observer. The output of the observer is fed as an initial c...
متن کاملPredictive Control of HCCI Engines using Physical Models
Homogeneous Charge Compression Ignition (HCCI) is a promising internal combustion engine concept. It holds promise of combining low emission levels with high efficiency. However, as ignition timing in HCCI operation lacks direct actuation and is highly sensitive to operating conditions and disturbances, robust closed-loop control is necessary. To facilitate control design and allow for porting ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Combustion and Flame
سال: 2015
ISSN: 0010-2180
DOI: 10.1016/j.combustflame.2015.07.040