Understanding catalytic CO<sub>2</sub> and CO conversion into methanol using computational fluid dynamics
نویسندگان
چکیده
To investigate the kinetics of methanol synthesis from a mixture CO2/CO/H2, computational fluid dynamics model has been developed, incorporating two distinct kinetic models, one which includes CO hydrogenation and does not.
منابع مشابه
Atmospheric methanol measurement using selective catalytic methanol to formaldehyde conversion
A novel atmospheric methanol measurement technique, employing selective gas-phase catalytic conversion of methanol to formaldehyde followed by detection of the formaldehyde product, has been developed and tested. The effects of temperature, gas flow rate, gas composition, reactor-bed length, and reactor-bed composition on the methanol conversion efficiency of a molybdenum-rich, ironmolybdate ca...
متن کاملCatalytic conversion of methanol to formaldehyde
Atmospheric methanol measurement using selective catalytic methanol to formaldehyde conversion S. J. Solomon, T. Custer, G. Schade, A. P. Soares Dias, and J. Burrows Institute of Environmental Physics, University of Bremen, Bremen, Germany GRECAT-Grupo de Estudos de Catalise Heterogenea, Universidade Tecnica de Lisboa, Lisbon, Portugal presently with: Department of Atmospheric Sciences, Texas A...
متن کاملAnalytical and comparative investigations on counter flow heat exchanger using computational fluid dynamics
This paper presents a comprehensive and exclusive thermodynamic analysis of counter flow heat exchanger under various operating and geometrical conditions. Analysis system (ANSYS) workbench 14.0 has been used for computational analysis and comparison with previous literature has been carried out in view of variable temperature and mass flow rate of hot and cold fluids. An analytical and statist...
متن کاملMultiphase flow and tromp curve simulation of dense medium cyclones using Computational Fluid Dynamics
Dense Medium Cyclone is a high capacity device that is widely used in coal preparation. It is simple in design but the swirling turbulent flow, the presence of medium and coal with different density and size fraction and the presence of the air-core make the flow pattern in DMCs complex. In this article the flow pattern simulation of DMC is performed with computational fluid dynamics and Fluent...
متن کاملInvestigation of stepped planning hull hydrodynamics using computational fluid dynamics and response surface method
The use of step at the bottom of the hull is one of the effective factors in reducing the resistance and increasing the stability of the Planning hull. The presence of step at the bottom of this type of hulls creates a separation in the flow, which reduces the wet surface on the hull, thus reducing the drag on the body, as well as reducing the dynamic trim. In this study, a design space was cre...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Faraday Discussions
سال: 2021
ISSN: ['1359-6640', '1364-5498']
DOI: https://doi.org/10.1039/d0fd00136h